Fenolftaleinli Asit-Baz Titrasyonu

Bir asit konsantrasyonunu standart baz ile belirleme

Titrations Intermediate (High School) 45 dak ~$15,00

Hedef

Konsantrasyonu bilinmeyen bir hidroklorik asit çözeltisinin konsantrasyonunu, fenolftalein indikatörü kullanarak standartlaştırılmış sodyum hidroksit çözeltisiyle titre ederek belirlemek.

Arka Plan

This classic acid-base titration demonstrates stoichiometric neutralization. HCl reacts with NaOH in a 1:1 molar ratio. Phenolphthalein turns pink above pH 8.2, providing a clear endpoint. Accurate burette technique and multiple trials are essential for reliable results.

Güvenlik Uyarıları

  • NaOH is corrosive — avoid skin and eye contact
  • HCl is corrosive — handle with care
  • Wear safety goggles throughout
  • Wash any spills immediately with water

Gerekli KKD

goggles gloves lab_coat

Malzemeler

  • Hydrochloric acid (HCl) (100 mL)
    Unknown concentration
  • Sodium hydroxide (NaOH) (100 mL)
    0.1M standardized
  • Phenolphthalein indicator (5 mL)
    1% in ethanol
  • Distilled water (500 mL)
    For rinsing

Ekipman

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette Pipette filler White tile Wash bottle

Prosedür

1

Rinse the burette with a small amount of NaOH solution, then fill it to the 0 mL mark. Record the exact starting volume.

5 dak Handle NaOH carefully
2

Using the pipette and filler, transfer exactly 25.0 mL of the unknown HCl solution into the Erlenmeyer flask.

3 dak
3

Add 2-3 drops of phenolphthalein indicator to the flask. The solution should remain colorless (acidic).

1 dak
4

Place the flask on the white tile under the burette. Begin adding NaOH slowly while swirling the flask continuously.

5 dak
5

As the endpoint approaches (pink color lingers longer), add NaOH drop by drop until a permanent pale pink color persists for 30 seconds.

5 dak
6

Record the final burette reading. Calculate the volume of NaOH used.

2 dak
7

Repeat the titration at least two more times for concordant results (within 0.10 mL).

15 dak
8

Calculate the concentration of HCl using: C(HCl) = C(NaOH) x V(NaOH) / V(HCl).

5 dak

Beklenen Sonuçlar

The endpoint should show a clear transition from colorless to a persistent pale pink. Concordant titre values (within 0.10 mL) indicate good technique. The calculated concentration should match the expected value within experimental error.

Temizlik

Drain the burette and rinse with distilled water. Neutralize waste solutions before disposal. Rinse all glassware thoroughly.

Ayrıntılar

Kategori
Titrations
Zorluk
Intermediate (High School)
Süre
45 dak
Tahmini Maliyet
$15,00
Adımlar
8
Malzemeler
4

Daha Fazla Deney

Antasit Tabletlerinin Geri Titrasyonu 60 min Çamaşır Suyunun İyodometrik Titrasyonu 50 min Çöktürme Titrasyonu (Mohr Yöntemi) 45 min İyot ile C Vitamini Titrasyonu 40 min Karbonat-Bikarbonat Karışımının Çift İndikatörlü Titrasyonu 55 min Konduktometrik Titrasyon 50 min Metil Turuncusu ile Asit-Baz Titrasyonu 40 min pH Titrasyon Eğrisi 50 min Potasyum Permanganat ile Redoks Titrasyonu 50 min Su Sertliği için EDTA Kompleksometrik Titrasyonu 45 min

Frequently Asked Questions

What is the objective of Fenolftaleinli Asit-Baz Titrasyonu?
Konsantrasyonu bilinmeyen bir hidroklorik asit çözeltisinin konsantrasyonunu, fenolftalein indikatörü kullanarak standartlaştırılmış sodyum hidroksit çözeltisiyle titre ederek belirlemek.
How difficult is Fenolftaleinli Asit-Baz Titrasyonu?
This experiment is rated as Intermediate (High School). It takes approximately 45 minutes to complete.
What safety precautions are needed for Fenolftaleinli Asit-Baz Titrasyonu?
Key safety precautions include: NaOH is corrosive — avoid skin and eye contact; HCl is corrosive — handle with care; Wear safety goggles throughout.
What materials are needed for Fenolftaleinli Asit-Baz Titrasyonu?
The main materials required are: Hydrochloric acid (HCl), Sodium hydroxide (NaOH), Phenolphthalein indicator, Distilled water.
What results should I expect from Fenolftaleinli Asit-Baz Titrasyonu?
The endpoint should show a clear transition from colorless to a persistent pale pink. Concordant titre values (within 0.10 mL) indicate good technique. The calculated concentration should match the expected value within experimental error.