การทดสอบเปลวไฟสตรอนเชียม

ระบุสตรอนเชียมจากเปลวไฟสีแดงสด

Flame Tests Beginner (Middle School) 15 นาที ~$10.00

วัตถุประสงค์

สังเกตเปลวไฟสีแดงสดที่เกิดจากไอออนสตรอนเชียม ซึ่งนิยมใช้ในดอกไม้ไฟสีแดงและพลุสัญญาณฉุกเฉิน

ความเป็นมา

Strontium compounds produce a vivid scarlet-red flame when heated, with primary emission lines at 460.7 nm and 707.0 nm. This distinctive red is widely used in pyrotechnics for red fireworks, road flares, and military signal flares. Strontium's flame color is more brilliant and more orange-red compared to lithium's deeper crimson.

คำเตือนด้านความปลอดภัย

  • Wear safety goggles at all times
  • Keep hair tied back near open flames
  • Handle HCl with care

อุปกรณ์ป้องกันส่วนบุคคลที่จำเป็น

goggles lab_coat

วัสดุ

  • Strontium chloride (SrCl₂) (1 g)
  • Hydrochloric acid (HCl) (10 mL)
    1M concentration
  • Distilled water (50 mL)
    For cleaning

อุปกรณ์

Bunsen burner Nichrome wire loop Watch glass Forceps

ขั้นตอนปฏิบัติ

1

Clean the nichrome wire by dipping in HCl and heating until no color appears.

2 นาที
2

Place strontium chloride on the watch glass and pick up a sample on the clean wire.

1 นาที
3

Hold the wire in the Bunsen burner flame and observe the flame color.

2 นาที
4

Compare the scarlet-red color with lithium (crimson) if previously tested.

2 นาที
5

Record observations noting intensity and hue differences from other red-producing elements.

1 นาที

ผลลัพธ์ที่คาดหวัง

A bright scarlet-red flame should appear, distinctly more orange-red than lithium's crimson. The color is vivid and persistent, easily distinguished from other metal flame colors.

การทำความสะอาด

Clean wire with HCl. Dispose of chemicals per lab protocol.

Frequently Asked Questions

What is the objective of การทดสอบเปลวไฟสตรอนเชียม?
สังเกตเปลวไฟสีแดงสดที่เกิดจากไอออนสตรอนเชียม ซึ่งนิยมใช้ในดอกไม้ไฟสีแดงและพลุสัญญาณฉุกเฉิน
How difficult is การทดสอบเปลวไฟสตรอนเชียม?
This experiment is rated as Beginner (Middle School). It takes approximately 15 minutes to complete.
What safety precautions are needed for การทดสอบเปลวไฟสตรอนเชียม?
Key safety precautions include: Wear safety goggles at all times; Keep hair tied back near open flames; Handle HCl with care.
What materials are needed for การทดสอบเปลวไฟสตรอนเชียม?
The main materials required are: Strontium chloride (SrCl₂), Hydrochloric acid (HCl), Distilled water.
What results should I expect from การทดสอบเปลวไฟสตรอนเชียม?
A bright scarlet-red flame should appear, distinctly more orange-red than lithium's crimson. The color is vivid and persistent, easily distinguished from other metal flame colors.