Fosfat Kolorimetrik Tayini

Molibden mavisi yöntemiyle sudaki fosfat düzeyini ölçme

Colorimetry Advanced (University) 90 dak ~$15,00

Hedef

Amonyum molibdat kolorimetrik yöntemini kullanarak su örneğindeki fosfat konsantrasyonunu belirlemek.

Arka Plan

The molybdenum blue method is the standard technique for phosphate determination in environmental water analysis. Phosphate ions react with ammonium molybdate in acidic solution to form a phosphomolybdate complex, which is then reduced by ascorbic acid to form an intensely blue colored complex (molybdenum blue). The intensity of the blue color is proportional to phosphate concentration. This method can detect phosphate at concentrations as low as 0.01 mg/L.

Güvenlik Uyarıları

  • Ammonium molybdate solution contains sulfuric acid — corrosive
  • Antimony compounds are toxic
  • Use pipette fillers — never mouth-pipette
  • Dispose of molybdate waste in heavy metal waste container

Gerekli KKD

goggles gloves lab_coat

Malzemeler

  • Potassium dihydrogen phosphate (KH₂PO₄) (1 g)
    For stock standard
  • Ammonium molybdate solution (100 mL)
    2.5% in 5M H₂SO₄
  • Ascorbic acid solution (50 mL)
    1% freshly prepared
  • Antimony potassium tartrate (10 mL)
    Catalyst solution
  • Environmental water sample (100 mL)
    Pond, river, or tap water
  • Distilled water (500 mL)

Ekipman

Spectrophotometer Cuvettes (1 cm path length) Volumetric flasks (50 mL, 8 total) Pipettes (1 mL, 5 mL, 10 mL) Water bath (37°C)

Prosedür

1

Prepare a 100 ppm phosphate stock solution by dissolving 0.1433 g KH₂PO₄ in distilled water and making up to 1 L. Then prepare working standards: 0, 0.1, 0.2, 0.5, 1.0, 2.0 ppm.

15 dak
2

Prepare the combined reagent: mix 50 mL ammonium molybdate solution, 5 mL antimony potassium tartrate solution, and 30 mL ascorbic acid solution. Use within 4 hours.

10 dak Handle acid carefully
3

To each 50 mL standard flask and the water sample, add 8 mL of combined reagent. Mix well.

10 dak
4

Allow color development for 10 minutes at room temperature (or 5 minutes in 37°C water bath).

10 dak
5

Measure absorbance at 880 nm (or 710 nm if 880 nm is not available). Zero with the blank.

15 dak
6

Plot the calibration curve. Determine the phosphate concentration of the water sample.

15 dak
7

Evaluate the result against environmental standards. Phosphate above 0.02 mg/L may indicate eutrophication risk.

15 dak

Beklenen Sonuçlar

The calibration curve should be linear in the 0–2 ppm range. The blue color deepens with increasing phosphate. Environmental samples typically show 0.01–0.5 ppm in clean water, higher in agricultural runoff areas.

Temizlik

Collect all molybdate-containing solutions in labeled waste. Rinse all volumetric glassware. Clean cuvettes immediately.

Ayrıntılar

Kategori
Colorimetry
Zorluk
Advanced (University)
Süre
90 dak
Tahmini Maliyet
$15,00
Adımlar
7
Malzemeler
6

Daha Fazla Deney

Aspirinin Spektrofotometrik Tayini 75 min Beer-Lambert Yasasının Doğrulanması 60 min Glukozun Kolorimetrik Tayini 60 min Karışımın Spektrofotometrik Analizi 75 min Kolorimetrik Protein Analizi (Bradford Yöntemi) 60 min Spektrofotometreyle Gıda Boyası Analizi 60 min Sudaki Demir Tayini 75 min

Frequently Asked Questions

What is the objective of Fosfat Kolorimetrik Tayini?
Amonyum molibdat kolorimetrik yöntemini kullanarak su örneğindeki fosfat konsantrasyonunu belirlemek.
How difficult is Fosfat Kolorimetrik Tayini?
This experiment is rated as Advanced (University). It takes approximately 90 minutes to complete.
What safety precautions are needed for Fosfat Kolorimetrik Tayini?
Key safety precautions include: Ammonium molybdate solution contains sulfuric acid — corrosive; Antimony compounds are toxic; Use pipette fillers — never mouth-pipette.
What materials are needed for Fosfat Kolorimetrik Tayini?
The main materials required are: Potassium dihydrogen phosphate (KH₂PO₄), Ammonium molybdate solution, Ascorbic acid solution, Antimony potassium tartrate, Environmental water sample.
What results should I expect from Fosfat Kolorimetrik Tayini?
The calibration curve should be linear in the 0–2 ppm range. The blue color deepens with increasing phosphate. Environmental samples typically show 0.01–0.5 ppm in clean water, higher in agricultural runoff areas.