Aspirin (Asetilsalisilik Asit) Sentezi

Dünyanın en yaygın kullanılan ilaçlarından birini yapma

Organic Synthesis Advanced (University) 90 dak ~$15,00

Hedef

Salisilik asidi asetik anhidrit ile asetilleyerek aspirin (asetilsalisilik asit) sentezlemek ve saflığını erime noktası ölçümü ile değerlendirmek.

Arka Plan

Aspirin synthesis is a classic organic chemistry experiment. Salicylic acid reacts with acetic anhydride in the presence of a phosphoric acid catalyst to form acetylsalicylic acid and acetic acid. The product is purified by recrystallization and verified by melting point (135°C for pure aspirin).

Güvenlik Uyarıları

  • Acetic anhydride is corrosive and has a pungent odor — work in fume hood
  • Phosphoric acid is corrosive
  • Do not consume the synthesized aspirin
  • Wear gloves and goggles

Gerekli KKD

goggles gloves lab_coat

Malzemeler

  • Salicylic acid (2 g)
  • Acetic anhydride (5 mL)
    Corrosive, pungent
  • Phosphoric acid (H₃PO₄) (5 drops)
    85%, catalyst
  • Distilled water (100 mL)
    Ice-cold for crystallization
  • Ethanol (10 mL)
    For recrystallization

Ekipman

Erlenmeyer flask (125 mL) Hot water bath (beaker) Buchner funnel Filter flask Vacuum pump Melting point apparatus Thermometer Ice bath

Prosedür

1

Weigh 2.0 g of salicylic acid into the Erlenmeyer flask. Record the exact mass.

3 dak
2

In a fume hood, add 5 mL of acetic anhydride and 5 drops of phosphoric acid catalyst.

3 dak Acetic anhydride is corrosive and pungent
3

Heat the flask in a water bath at 70-80°C for 15 minutes, swirling occasionally.

15 dak
4

Remove from heat and carefully add 20 mL of cold water to decompose excess acetic anhydride.

3 dak Exothermic — add water slowly
5

Cool the flask in an ice bath until crystals form. Scratch the flask wall with a glass rod to initiate crystallization.

10 dak
6

Collect the crude product by vacuum filtration using the Buchner funnel. Wash with cold water.

10 dak
7

Recrystallize: dissolve the crude product in 5 mL warm ethanol, add 15 mL warm water, then cool slowly in ice bath.

15 dak
8

Collect purified crystals by vacuum filtration. Dry and determine the melting point.

10 dak
9

Calculate the percent yield. Pure aspirin melts at 135°C.

5 dak

Beklenen Sonuçlar

White needle-like crystals with a melting point of 134-136°C (pure aspirin is 135°C). Typical yield is 70-90%. A depressed or broad melting range indicates impurities (likely unreacted salicylic acid).

Temizlik

Dispose of organic waste in designated containers. Do not consume the product. Rinse all glassware.

Ayrıntılar

Kategori
Organic Synthesis
Zorluk
Advanced (University)
Süre
90 dak
Tahmini Maliyet
$15,00
Adımlar
9
Malzemeler
5

Daha Fazla Deney

Aldol Kondenzasyonu (Dibenzalaseton) 75 min Asetaminofen (Parasetamol) Sentezi 80 min Bitkisel Yağdan Biyodizel Üretimi 60 min Çaydan Kafein Ekstraksiyonu 90 min Etil Asetatın Fischer Esterifikasyonu 90 min Luminol Sentezi 120 min Muz Aroması (İzoamil Asetat) Sentezi 90 min Naylon 6,10 Yapımı (Naylon İp Hilesi) 30 min Sabunlaşma ile Sabun Yapımı 60 min Sümüklü Oyun Hamuru Sentezi (Çapraz Bağlı PVA) 20 min

Frequently Asked Questions

What is the objective of Aspirin (Asetilsalisilik Asit) Sentezi?
Salisilik asidi asetik anhidrit ile asetilleyerek aspirin (asetilsalisilik asit) sentezlemek ve saflığını erime noktası ölçümü ile değerlendirmek.
How difficult is Aspirin (Asetilsalisilik Asit) Sentezi?
This experiment is rated as Advanced (University). It takes approximately 90 minutes to complete.
What safety precautions are needed for Aspirin (Asetilsalisilik Asit) Sentezi?
Key safety precautions include: Acetic anhydride is corrosive and has a pungent odor — work in fume hood; Phosphoric acid is corrosive; Do not consume the synthesized aspirin.
What materials are needed for Aspirin (Asetilsalisilik Asit) Sentezi?
The main materials required are: Salicylic acid, Acetic anhydride, Phosphoric acid (H₃PO₄), Distilled water, Ethanol.
What results should I expect from Aspirin (Asetilsalisilik Asit) Sentezi?
White needle-like crystals with a melting point of 134-136°C (pure aspirin is 135°C). Typical yield is 70-90%. A depressed or broad melting range indicates impurities (likely unreacted salicylic acid).