Lithiumgewinnung aus Sole für die Batterieproduktion

Gewinnung des leichtesten Metalls aus Salzflächen und Geothermalwässern

Energy & Battery Technology Global Industrial Scale $25 billion

Übersicht

Lithium is extracted from continental brines (salt flats in Chile, Argentina, Bolivia — the 'Lithium Triangle') by solar evaporation and chemical precipitation, or from hard-rock spodumene ore (Australia) by acid roasting. Lithium demand is surging due to lithium-ion batteries for EVs and energy storage. Brine extraction accounts for about 50% of global production and is lower cost, while spodumene processing is faster but more energy-intensive. Battery-grade lithium carbonate or lithium hydroxide requires >99.5% purity.

Chemischer Prozess

For brine: Lithium-bearing brine (200-2,000 ppm Li) is pumped to evaporation ponds where solar evaporation over 12-18 months concentrates lithium to 6,000+ ppm while NaCl and KCl crystallize out. Magnesium is removed by lime addition, and lithium carbonate is precipitated by adding soda ash (Na₂CO₃) at 90 degrees C. The precipitate is filtered, washed, and dried to battery-grade specification.

2LiCl(brine) + Na₂CO₃ →[90 degrees C] Li₂CO₃↓ + 2NaCl (lithium carbonate precipitation)
MgCl₂ + Ca(OH)₂ → Mg(OH)₂↓ + CaCl₂ (magnesium removal)
Li₂CO₃ + Ca(OH)₂ → 2LiOH + CaCO₃ (causticization to lithium hydroxide)

Rohstoffe

  • Lithium-bearing brine — Salt flats (Atacama, Hombre Muerto, Uyuni) (Lithium source (200-2,000 ppm Li))
  • Soda ash (Na₂CO₃) — Solvay process or trona mining (Lithium precipitation agent)
  • Calcium hydroxide (Ca(OH)₂) — Lime kiln (Magnesium removal agent)

Endprodukte

  • Battery-grade lithium carbonate (Li₂CO₃) — NMC and LFP cathode production (>99.5% purity, <10 ppm Na, <5 ppm Fe)
  • Battery-grade lithium hydroxide (LiOH·H₂O) — High-nickel NMC cathode production (>56.5% LiOH, required for NMC 811)
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Brine evaporation consumes vast amounts of water in the world's driest regions, creating tension with local communities and ecosystems. Evaporation ponds cover hundreds of hectares. Spodumene processing requires energy-intensive acid roasting at 250 degrees C. Direct lithium extraction (DLE) technologies promise 90% less water use and land footprint.

Sicherheitshinweise

Neuere Innovationen

Direct lithium extraction (DLE) using ion-exchange, adsorption, or membrane technologies can extract lithium from dilute brines in hours instead of months, with much lower water consumption.
Lithium extraction from geothermal brines provides both clean energy and lithium.
Recycling of end-of-life EV batteries is expected to provide 10-20% of lithium supply by 2035.

Produktionsmaßstab

130000

Tonnen/Jahr

$25 billion

Marktwert

Mehr in Energy & Battery Technology

Biodieselproduktion durch Umesterung

Global Industrial Scale

Biogasproduktion durch anaerobe Vergärung

Global Industrial Scale

Herstellung von Photovoltaik-Siliziumsolarzellen

Global Industrial Scale

PEM-Wasserelektrolyse für grünen Wasserstoff

Commercial Production

Urankraftstoffanreicherung durch Gaszentrifuge

Global Industrial Scale

Wasserstoffbrennzellen-Elektrochemie (PEMFC)

Commercial Production

Wasserstoffproduktion durch Dampfreformierung von Methan

Global Industrial Scale

Frequently Asked Questions

What industry uses Lithiumgewinnung aus Sole für die Batterieproduktion?
Lithiumgewinnung aus Sole für die Batterieproduktion is used in the energy & battery technology sector at global industrial scale scale.
What process is involved in Lithiumgewinnung aus Sole für die Batterieproduktion?
For brine: Lithium-bearing brine (200-2,000 ppm Li) is pumped to evaporation ponds where solar evaporation over 12-18 months concentrates lithium to 6,000+ ppm while NaCl and KCl crystallize out. Magnesium is removed by lime addition, and lithium carbonate is precipitated by adding soda ash (Na₂CO₃)
What is the economic significance of Lithiumgewinnung aus Sole für die Batterieproduktion?
Lithiumgewinnung aus Sole für die Batterieproduktion has a market value of $25 billion and annual production of 130,000 tons.
What is the environmental impact of Lithiumgewinnung aus Sole für die Batterieproduktion?
Brine evaporation consumes vast amounts of water in the world's driest regions, creating tension with local communities and ecosystems. Evaporation ponds cover hundreds of hectares. Spodumene processing requires energy-intensive acid roasting at 250 degrees C. Direct lithium extraction (DLE) technol
What raw materials are used in Lithiumgewinnung aus Sole für die Batterieproduktion?
The main raw materials include: Lithium-bearing brine, Soda ash (Na₂CO₃), Calcium hydroxide (Ca(OH)₂).