Beilstein-Test auf Halogene

Nachweis von Halogenatomen in organischen Verbindungen durch Kupferdraht-Flammentest

Qualitative Analysis Beginner (Middle School) 25 Min. ~$5,00

Ziel

Bestimmen, ob eine organische Verbindung Halogenatome (Cl, Br, I) enthält, mithilfe des Beilstein-Kupferdrahttests.

Hintergrund

The Beilstein test is a simple qualitative test for halogens in organic compounds. A copper wire is heated in a flame to form copper(II) oxide, then dipped in the test substance and returned to the flame. If a halogen is present, volatile copper halide forms and imparts a green or blue-green color to the flame. The test is sensitive but not specific (it does not distinguish between Cl, Br, and I, and can give false positives with some nitrogen compounds).

Sicherheitswarnungen

  • Chloroform is toxic — avoid inhalation and skin contact
  • Work in a fume hood when testing volatile organics
  • Hot copper wire can cause burns
  • Keep flammable solvents away from the flame

Erforderliche PSA

goggles gloves lab_coat

Materialien

  • Copper wire (20 gauge) (15 cm)
    Make a small loop at one end
  • Chloroform (CHCl₃) (2 mL)
    Positive control
  • Ethanol (C₂H₅OH) (2 mL)
    Negative control
  • Unknown organic samples (2 mL each)
    3–4 samples
  • Cork or holder for copper wire (1)

Ausrüstung

Bunsen burner Watch glasses (6) Forceps

Durchführung

1

Heat the copper wire loop in the oxidizing zone of the Bunsen burner until it glows red and no green color is visible (this burns off contaminants and forms CuO).

3 Min. Wire is extremely hot
2

Allow the wire to cool slightly, then dip it into the chloroform (positive control). Return the wire to the flame.

3 Min. Chloroform is volatile — use fume hood
3

Observe the bright green flame (positive result for halogen). Record the color and intensity.

2 Min.
4

Clean the wire by heating until green color disappears. Repeat the test with ethanol (negative control). No green color should appear.

3 Min.
5

Test each unknown sample using the same procedure. Record whether each gives a positive (green) or negative result.

10 Min. Clean wire between samples
6

Record all results and identify which unknowns likely contain halogen atoms.

4 Min.

Erwartete Ergebnisse

Chloroform produces a vivid green flame (positive). Ethanol produces no green color (negative). Halogen-containing unknowns show green coloration of varying intensity.

Aufräumen

Allow copper wire to cool. Store organic waste in halogenated or non-halogenated solvent waste containers as appropriate. Wipe down surfaces.

Details

Kategorie
Qualitative Analysis
Schwierigkeit
Beginner (Middle School)
Dauer
25 Min.
Geschätzte Kosten
$5,00
Schritte
6
Materialien
5

Weitere Experimente

Borax-Perlentest auf Metallionen 45 min Chromatographie von Pflanzenpigmenten 60 min Flammen-Emissionsspektroskopie 60 min Identifikationsaufgabe für unbekannte Substanzen 75 min Kationenidentifikation durch Fällung 90 min pH-Indikator-Regenbogen 45 min Stärke-Iod-Test auf Kohlenhydrate 30 min Tests zur Anionenidentifikation 60 min Wasserhärtetest mit Seifenlösung 40 min

Frequently Asked Questions

What is the objective of Beilstein-Test auf Halogene?
Bestimmen, ob eine organische Verbindung Halogenatome (Cl, Br, I) enthält, mithilfe des Beilstein-Kupferdrahttests.
How difficult is Beilstein-Test auf Halogene?
This experiment is rated as Beginner (Middle School). It takes approximately 25 minutes to complete.
What safety precautions are needed for Beilstein-Test auf Halogene?
Key safety precautions include: Chloroform is toxic — avoid inhalation and skin contact; Work in a fume hood when testing volatile organics; Hot copper wire can cause burns.
What materials are needed for Beilstein-Test auf Halogene?
The main materials required are: Copper wire (20 gauge), Chloroform (CHCl₃), Ethanol (C₂H₅OH), Unknown organic samples, Cork or holder for copper wire.
What results should I expect from Beilstein-Test auf Halogene?
Chloroform produces a vivid green flame (positive). Ethanol produces no green color (negative). Halogen-containing unknowns show green coloration of varying intensity.