Redoxtitration mit Kaliumpermanganat

Bestimmung der Eisen(II)-Konzentration mit KMnO₄

Titrations Advanced (University) 50 Min. ~$18,00

Ziel

Die Konzentration einer Eisen(II)-Sulfatlösung durch Titration mit standardisiertem Kaliumpermanganat bestimmen, einem selbstanzeigenden Reagenz.

Hintergrund

Potassium permanganate is a powerful oxidizing agent that reacts with Fe2+ in acidic solution. MnO4- (purple) is reduced to Mn2+ (nearly colorless), so permanganate acts as its own indicator. The endpoint occurs when a single drop of excess KMnO4 produces a permanent pink/purple color.

Sicherheitswarnungen

  • KMnO₄ stains skin and clothing permanently
  • H₂SO₄ is corrosive
  • Wear safety goggles and gloves throughout
  • Wipe up KMnO₄ spills immediately

Erforderliche PSA

goggles gloves lab_coat

Materialien

  • Iron(II) sulfate solution (100 mL)
    Unknown concentration
  • Potassium permanganate (KMnO₄) (100 mL)
    0.02M standardized
  • Sulfuric acid (H₂SO₄) (50 mL)
    1M
  • Distilled water (200 mL)

Ausrüstung

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette Pipette filler White tile

Durchführung

1

Rinse the burette with KMnO₄ solution, then fill to the 0 mL mark. Record the meniscus reading (read from the top of the meniscus since KMnO₄ is opaque).

5 Min. KMnO₄ stains — handle carefully
2

Pipette exactly 25.0 mL of iron(II) sulfate solution into the Erlenmeyer flask.

3 Min.
3

Add 10 mL of 1M sulfuric acid to the flask to ensure acidic conditions.

2 Min. Handle acid carefully
4

Slowly add KMnO₄ from the burette while swirling. Each drop will decolorize as Fe2+ reduces MnO4-.

10 Min.
5

As the endpoint approaches, add drop by drop until a faint permanent pink/purple color persists for 30 seconds.

5 Min.
6

Record the final burette reading and calculate the volume used.

2 Min.
7

Repeat at least twice for concordant results.

15 Min.
8

Calculate the Fe2+ concentration using the balanced equation: MnO4- + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O.

5 Min.

Erwartete Ergebnisse

The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.

Aufräumen

Dilute waste solutions and dispose of KMnO₄ waste according to lab protocols. Rinse the burette thoroughly with water. Clean any stains with dilute acid or sodium sulfite.

Details

Kategorie
Titrations
Schwierigkeit
Advanced (University)
Dauer
50 Min.
Geschätzte Kosten
$18,00
Schritte
8
Materialien
4

Weitere Experimente

Doppelindikator-Titration eines Carbonat-Bicarbonat-Gemisches 55 min EDTA-Komplexometrie zur Wasserhärtebestimmung 45 min Fällungstitration (Mohr-Methode) 45 min Iodometrische Titration von Bleichmittel 50 min Konduktometrische Titration 50 min pH-Titrationskurve 50 min Rücktitration von Antazida-Tabletten 60 min Säure-Base-Titration mit Methylorange 40 min Säure-Base-Titration mit Phenolphthalein 45 min Vitamin-C-Titration mit Iod 40 min

Frequently Asked Questions

What is the objective of Redoxtitration mit Kaliumpermanganat?
Die Konzentration einer Eisen(II)-Sulfatlösung durch Titration mit standardisiertem Kaliumpermanganat bestimmen, einem selbstanzeigenden Reagenz.
How difficult is Redoxtitration mit Kaliumpermanganat?
This experiment is rated as Advanced (University). It takes approximately 50 minutes to complete.
What safety precautions are needed for Redoxtitration mit Kaliumpermanganat?
Key safety precautions include: KMnO₄ stains skin and clothing permanently; H₂SO₄ is corrosive; Wear safety goggles and gloves throughout.
What materials are needed for Redoxtitration mit Kaliumpermanganat?
The main materials required are: Iron(II) sulfate solution, Potassium permanganate (KMnO₄), Sulfuric acid (H₂SO₄), Distilled water.
What results should I expect from Redoxtitration mit Kaliumpermanganat?
The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.