Kemiluminensensi dengan Luminol

Menghasilkan cahaya biru melalui reaksi kimia tanpa panas

Classroom Demonstrations Intermediate (High School) 30 menit ~$15,00

Tujuan

Demonstrasikan kemiluminensensi dengan mengoksidasi luminol dengan hidrogen peroksida dengan adanya katalis, menghasilkan cahaya biru yang terlihat.

Latar Belakang

Luminol (3-aminophthalhydrazide) produces an eerie blue glow when oxidized by hydrogen peroxide in basic solution with a transition metal catalyst. The oxidation produces 3-aminophthalate in an excited electronic state, which releases energy as a photon of blue light (425 nm) as it returns to the ground state. This is the same reaction used by forensic scientists to detect trace amounts of blood at crime scenes, where the iron in hemoglobin acts as the catalyst.

Peringatan Keselamatan

  • NaOH is corrosive — handle with care
  • Potassium ferricyanide is harmful if ingested
  • Perform in a dark room for best effect
  • Do not mix stock solutions until ready to demonstrate

APD yang Diperlukan

goggles gloves lab_coat

Bahan

  • Luminol (0.5 g)
    3-aminophthalhydrazide
  • Sodium hydroxide (NaOH) (5 g)
    To make solution basic
  • Hydrogen peroxide (3%) (50 mL)
    Household concentration
  • Potassium ferricyanide (K₃[Fe(CN)₆]) (0.5 g)
    Catalyst
  • Distilled water (500 mL)

Peralatan

Beakers (500 mL, 2) Spiral glass tubing or clear tubing Dark room or blackout curtains Magnetic stirrer (optional)

Prosedur

1

Prepare Solution A: Dissolve 0.5 g luminol and 5 g NaOH in 250 mL distilled water.

5 menit NaOH is corrosive
2

Prepare Solution B: Dissolve 0.5 g K₃[Fe(CN)₆] in 250 mL of 3% H₂O₂.

5 menit
3

Darken the room completely. Allow eyes to adjust for 1–2 minutes.

2 menit
4

Pour both solutions simultaneously into a large beaker or through spiral glass tubing. A bright blue glow appears immediately.

3 menit
5

Observe the glow lasting for several minutes. Stirring or agitation renews the glow by mixing fresh reactants.

10 menit
6

Discuss the mechanism: luminol oxidation → excited 3-aminophthalate → photon emission (425 nm). Compare with bioluminescence and fluorescence.

5 menit

Hasil yang Diharapkan

A vivid blue glow appears when the solutions are mixed. The light intensity peaks immediately and fades over several minutes. The glow is bright enough to read by in a completely dark room.

Pembersihan

The spent solution is relatively non-toxic. Pour down the drain with copious water. Rinse all glassware.

Detail

Kategori
Classroom Demonstrations
Tingkat Kesulitan
Intermediate (High School)
Durasi
30 menit
Perkiraan Biaya
$15,00
Langkah
6
Bahan
5

Eksperimen Lainnya

Cairan Non-Newton: Ooblek 20 min Gelas Kimia yang Menghilang (Pencocokan Indeks Bias) 15 min Kolom Kerapatan Pelangi 30 min Pasta Gigi Gajah 20 min Pembakaran Magnesium dalam Es Kering 25 min Pembekuan Seketika: Air Superdingin 120 min Reaksi Jam Iodin 45 min Reaksi Natrium dan Air 25 min Reaksi Osilasi Briggs-Rauscher 40 min Reaksi Termit 30 min

Frequently Asked Questions

What is the objective of Kemiluminensensi dengan Luminol?
Demonstrasikan kemiluminensensi dengan mengoksidasi luminol dengan hidrogen peroksida dengan adanya katalis, menghasilkan cahaya biru yang terlihat.
How difficult is Kemiluminensensi dengan Luminol?
This experiment is rated as Intermediate (High School). It takes approximately 30 minutes to complete.
What safety precautions are needed for Kemiluminensensi dengan Luminol?
Key safety precautions include: NaOH is corrosive — handle with care; Potassium ferricyanide is harmful if ingested; Perform in a dark room for best effect.
What materials are needed for Kemiluminensensi dengan Luminol?
The main materials required are: Luminol, Sodium hydroxide (NaOH), Hydrogen peroxide (3%), Potassium ferricyanide (K₃[Fe(CN)₆]), Distilled water.
What results should I expect from Kemiluminensensi dengan Luminol?
A vivid blue glow appears when the solutions are mixed. The light intensity peaks immediately and fades over several minutes. The glow is bright enough to read by in a completely dark room.