Sintesis Aspirin (Asam Asetilsalisilat)

Membuat salah satu obat paling umum di dunia

Organic Synthesis Advanced (University) 90 menit ~$15,00

Tujuan

Sintesis aspirin (asam asetilsalisilat) dengan asetilasi asam salisilat dengan anhidrida asetat, dan nilai kemurnian dengan penentuan titik leleh.

Latar Belakang

Aspirin synthesis is a classic organic chemistry experiment. Salicylic acid reacts with acetic anhydride in the presence of a phosphoric acid catalyst to form acetylsalicylic acid and acetic acid. The product is purified by recrystallization and verified by melting point (135°C for pure aspirin).

Peringatan Keselamatan

  • Acetic anhydride is corrosive and has a pungent odor — work in fume hood
  • Phosphoric acid is corrosive
  • Do not consume the synthesized aspirin
  • Wear gloves and goggles

APD yang Diperlukan

goggles gloves lab_coat

Bahan

  • Salicylic acid (2 g)
  • Acetic anhydride (5 mL)
    Corrosive, pungent
  • Phosphoric acid (H₃PO₄) (5 drops)
    85%, catalyst
  • Distilled water (100 mL)
    Ice-cold for crystallization
  • Ethanol (10 mL)
    For recrystallization

Peralatan

Erlenmeyer flask (125 mL) Hot water bath (beaker) Buchner funnel Filter flask Vacuum pump Melting point apparatus Thermometer Ice bath

Prosedur

1

Weigh 2.0 g of salicylic acid into the Erlenmeyer flask. Record the exact mass.

3 menit
2

In a fume hood, add 5 mL of acetic anhydride and 5 drops of phosphoric acid catalyst.

3 menit Acetic anhydride is corrosive and pungent
3

Heat the flask in a water bath at 70-80°C for 15 minutes, swirling occasionally.

15 menit
4

Remove from heat and carefully add 20 mL of cold water to decompose excess acetic anhydride.

3 menit Exothermic — add water slowly
5

Cool the flask in an ice bath until crystals form. Scratch the flask wall with a glass rod to initiate crystallization.

10 menit
6

Collect the crude product by vacuum filtration using the Buchner funnel. Wash with cold water.

10 menit
7

Recrystallize: dissolve the crude product in 5 mL warm ethanol, add 15 mL warm water, then cool slowly in ice bath.

15 menit
8

Collect purified crystals by vacuum filtration. Dry and determine the melting point.

10 menit
9

Calculate the percent yield. Pure aspirin melts at 135°C.

5 menit

Hasil yang Diharapkan

White needle-like crystals with a melting point of 134-136°C (pure aspirin is 135°C). Typical yield is 70-90%. A depressed or broad melting range indicates impurities (likely unreacted salicylic acid).

Pembersihan

Dispose of organic waste in designated containers. Do not consume the product. Rinse all glassware.

Detail

Kategori
Organic Synthesis
Tingkat Kesulitan
Advanced (University)
Durasi
90 menit
Perkiraan Biaya
$15,00
Langkah
9
Bahan
5

Eksperimen Lainnya

Ekstraksi Kafein dari Teh 90 min Esterifikasi Fischer Etil Asetat 90 min Kondensasi Aldol (Dibenzalaseton) 75 min Pembuatan Nilon 6,10 (Trik Tali Nilon) 30 min Pembuatan Sabun dengan Saponifikasi 60 min Preparasi Asetaminofen (Parasetamol) 80 min Produksi Biodiesel dari Minyak Nabati 60 min Sintesis Lendir (PVA Terikat Silang) 20 min Sintesis Luminol 120 min Sintesis Minyak Pisang (Isoamil Asetat) 90 min

Frequently Asked Questions

What is the objective of Sintesis Aspirin (Asam Asetilsalisilat)?
Sintesis aspirin (asam asetilsalisilat) dengan asetilasi asam salisilat dengan anhidrida asetat, dan nilai kemurnian dengan penentuan titik leleh.
How difficult is Sintesis Aspirin (Asam Asetilsalisilat)?
This experiment is rated as Advanced (University). It takes approximately 90 minutes to complete.
What safety precautions are needed for Sintesis Aspirin (Asam Asetilsalisilat)?
Key safety precautions include: Acetic anhydride is corrosive and has a pungent odor — work in fume hood; Phosphoric acid is corrosive; Do not consume the synthesized aspirin.
What materials are needed for Sintesis Aspirin (Asam Asetilsalisilat)?
The main materials required are: Salicylic acid, Acetic anhydride, Phosphoric acid (H₃PO₄), Distilled water, Ethanol.
What results should I expect from Sintesis Aspirin (Asam Asetilsalisilat)?
White needle-like crystals with a melting point of 134-136°C (pure aspirin is 135°C). Typical yield is 70-90%. A depressed or broad melting range indicates impurities (likely unreacted salicylic acid).