Titrasi Redoks dengan Kalium Permanganat

Menentukan konsentrasi besi(II) menggunakan KMnO₄

Titrations Advanced (University) 50 menit ~$18,00

Tujuan

Tentukan konsentrasi larutan besi(II) sulfat dengan menitrasinya dengan kalium permanganat standar, reagen yang menunjukkan dirinya sendiri.

Latar Belakang

Potassium permanganate is a powerful oxidizing agent that reacts with Fe2+ in acidic solution. MnO4- (purple) is reduced to Mn2+ (nearly colorless), so permanganate acts as its own indicator. The endpoint occurs when a single drop of excess KMnO4 produces a permanent pink/purple color.

Peringatan Keselamatan

  • KMnO₄ stains skin and clothing permanently
  • H₂SO₄ is corrosive
  • Wear safety goggles and gloves throughout
  • Wipe up KMnO₄ spills immediately

APD yang Diperlukan

goggles gloves lab_coat

Bahan

  • Iron(II) sulfate solution (100 mL)
    Unknown concentration
  • Potassium permanganate (KMnO₄) (100 mL)
    0.02M standardized
  • Sulfuric acid (H₂SO₄) (50 mL)
    1M
  • Distilled water (200 mL)

Peralatan

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette Pipette filler White tile

Prosedur

1

Rinse the burette with KMnO₄ solution, then fill to the 0 mL mark. Record the meniscus reading (read from the top of the meniscus since KMnO₄ is opaque).

5 menit KMnO₄ stains — handle carefully
2

Pipette exactly 25.0 mL of iron(II) sulfate solution into the Erlenmeyer flask.

3 menit
3

Add 10 mL of 1M sulfuric acid to the flask to ensure acidic conditions.

2 menit Handle acid carefully
4

Slowly add KMnO₄ from the burette while swirling. Each drop will decolorize as Fe2+ reduces MnO4-.

10 menit
5

As the endpoint approaches, add drop by drop until a faint permanent pink/purple color persists for 30 seconds.

5 menit
6

Record the final burette reading and calculate the volume used.

2 menit
7

Repeat at least twice for concordant results.

15 menit
8

Calculate the Fe2+ concentration using the balanced equation: MnO4- + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O.

5 menit

Hasil yang Diharapkan

The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.

Pembersihan

Dilute waste solutions and dispose of KMnO₄ waste according to lab protocols. Rinse the burette thoroughly with water. Clean any stains with dilute acid or sodium sulfite.

Detail

Kategori
Titrations
Tingkat Kesulitan
Advanced (University)
Durasi
50 menit
Perkiraan Biaya
$18,00
Langkah
8
Bahan
4

Eksperimen Lainnya

Kurva Titrasi pH 50 min Titrasi Asam-Basa dengan Fenolftalein 45 min Titrasi Asam-Basa dengan Metil Oranye 40 min Titrasi Balik Tablet Antasida 60 min Titrasi Indikator Ganda Campuran Karbonat-Bikarbonat 55 min Titrasi Iodometrik Pemutih 50 min Titrasi Kompleksometrik EDTA untuk Kesadahan Air 45 min Titrasi Konduktometrik 50 min Titrasi Pengendapan (Metode Mohr) 45 min Titrasi Vitamin C dengan Iodin 40 min

Frequently Asked Questions

What is the objective of Titrasi Redoks dengan Kalium Permanganat?
Tentukan konsentrasi larutan besi(II) sulfat dengan menitrasinya dengan kalium permanganat standar, reagen yang menunjukkan dirinya sendiri.
How difficult is Titrasi Redoks dengan Kalium Permanganat?
This experiment is rated as Advanced (University). It takes approximately 50 minutes to complete.
What safety precautions are needed for Titrasi Redoks dengan Kalium Permanganat?
Key safety precautions include: KMnO₄ stains skin and clothing permanently; H₂SO₄ is corrosive; Wear safety goggles and gloves throughout.
What materials are needed for Titrasi Redoks dengan Kalium Permanganat?
The main materials required are: Iron(II) sulfate solution, Potassium permanganate (KMnO₄), Sulfuric acid (H₂SO₄), Distilled water.
What results should I expect from Titrasi Redoks dengan Kalium Permanganat?
The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.