Production de Nylon 6,6 par Polycondensation

La première fibre synthétique commercialement réussie

Materials Science & Polymers Global Industrial Scale $26 billion

Aperçu

Nylon 6,6 is produced by the polycondensation of hexamethylenediamine and adipic acid, forming one of the most important engineering thermoplastics and synthetic fibers. Invented by Wallace Carothers at DuPont in 1935, nylon was the first fully synthetic fiber and revolutionized the textile industry. Beyond fibers, nylon 6,6 is used for automotive parts, electrical connectors, cable ties, and industrial components due to its excellent mechanical properties and chemical resistance.

Procédé chimique

Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extruded, quenched, and cut into chips or directly spun into fiber.

nH2N(CH2)6NH2 + nHOOC(CH2)4COOH -> -[NH(CH2)6NH-CO(CH2)4CO]n- + (2n-1)H2O (step-growth polycondensation)

Matières premières

  • Hexamethylenediamine (H2N(CH2)6NH2) — Hydrogenation of adiponitrile (Diamine monomer)
  • Adipic acid (HOOC(CH2)4COOH) — Oxidation of cyclohexane with nitric acid (Diacid monomer)

Produits finis

  • Nylon 6,6 resin/fiber — Textiles, carpets, automotive parts, electrical connectors (Tm = 265 degrees C, excellent abrasion resistance)
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced.

Considérations de sécurité

Innovations récentes

Bio-based adipic acid from renewable feedstocks (muconic acid route from glucose) is in commercial development.
Chemical recycling of nylon 6,6 back to monomers by depolymerization enables closed-loop production.

Échelle de production

4000000

tonnes/an

$26 billion

valeur marchande

Plus dans Materials Science & Polymers

Fabrication de Composites en Fibres de Verre

Global Industrial Scale

Fabrication de Fibres de Carbone à partir du Polyacrylonitrile

Commercial Production

Fabrication de Silicone (PDMS) par Procédé Direct

Global Industrial Scale

Production de Fibre Kevlar (Poly-p-phénylène Téréphtalamide)

Commercial Production

Production de Résine Époxy à partir du Bisphénol A

Global Industrial Scale

Synthèse du Polyéthylène par Catalyse Ziegler-Natta

Global Industrial Scale

Vulcanisation du Caoutchouc par Réticulation au Soufre

Global Industrial Scale

Frequently Asked Questions

What industry uses Production de Nylon 6,6 par Polycondensation?
Production de Nylon 6,6 par Polycondensation is used in the materials science & polymers sector at global industrial scale scale.
What process is involved in Production de Nylon 6,6 par Polycondensation?
Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extr
What is the economic significance of Production de Nylon 6,6 par Polycondensation?
Production de Nylon 6,6 par Polycondensation has a market value of $26 billion and annual production of 4,000,000 tons.
What is the environmental impact of Production de Nylon 6,6 par Polycondensation?
Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced
What raw materials are used in Production de Nylon 6,6 par Polycondensation?
The main raw materials include: Hexamethylenediamine (H2N(CH2)6NH2), Adipic acid (HOOC(CH2)4COOH).