Produção de Nylon 6,6 via Policondensação

A primeira fibra sintética comercialmente bem-sucedida

Materials Science & Polymers Global Industrial Scale $26 billion

Visão geral

Nylon 6,6 is produced by the polycondensation of hexamethylenediamine and adipic acid, forming one of the most important engineering thermoplastics and synthetic fibers. Invented by Wallace Carothers at DuPont in 1935, nylon was the first fully synthetic fiber and revolutionized the textile industry. Beyond fibers, nylon 6,6 is used for automotive parts, electrical connectors, cable ties, and industrial components due to its excellent mechanical properties and chemical resistance.

Processo químico

Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extruded, quenched, and cut into chips or directly spun into fiber.

nH2N(CH2)6NH2 + nHOOC(CH2)4COOH -> -[NH(CH2)6NH-CO(CH2)4CO]n- + (2n-1)H2O (step-growth polycondensation)

Matérias-primas

  • Hexamethylenediamine (H2N(CH2)6NH2) — Hydrogenation of adiponitrile (Diamine monomer)
  • Adipic acid (HOOC(CH2)4COOH) — Oxidation of cyclohexane with nitric acid (Diacid monomer)

Produtos finais

  • Nylon 6,6 resin/fiber — Textiles, carpets, automotive parts, electrical connectors (Tm = 265 degrees C, excellent abrasion resistance)
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced.

Considerações de segurança

Inovações recentes

Bio-based adipic acid from renewable feedstocks (muconic acid route from glucose) is in commercial development.
Chemical recycling of nylon 6,6 back to monomers by depolymerization enables closed-loop production.

Escala de produção

4000000

toneladas/ano

$26 billion

valor de mercado

Mais em Materials Science & Polymers

Fabricação de Compósitos de Fibra de Vidro

Global Industrial Scale

Fabricação de Fibra de Carbono a partir de Poliacrilonitrila

Commercial Production

Fabricação de Silicone (PDMS) pelo Processo Direto

Global Industrial Scale

Produção de Fibra Kevlar (Poli-p-fenileno Tereftalamida)

Commercial Production

Produção de Resina Epóxi a partir de Bisfenol A

Global Industrial Scale

Síntese de Polietileno via Catálise Ziegler-Natta

Global Industrial Scale

Vulcanização da Borracha com Reticulação de Enxofre

Global Industrial Scale

Frequently Asked Questions

What industry uses Produção de Nylon 6,6 via Policondensação?
Produção de Nylon 6,6 via Policondensação is used in the materials science & polymers sector at global industrial scale scale.
What process is involved in Produção de Nylon 6,6 via Policondensação?
Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extr
What is the economic significance of Produção de Nylon 6,6 via Policondensação?
Produção de Nylon 6,6 via Policondensação has a market value of $26 billion and annual production of 4,000,000 tons.
What is the environmental impact of Produção de Nylon 6,6 via Policondensação?
Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced
What raw materials are used in Produção de Nylon 6,6 via Policondensação?
The main raw materials include: Hexamethylenediamine (H2N(CH2)6NH2), Adipic acid (HOOC(CH2)4COOH).