Teste de Beilstein para Halogênios

Detecção de átomos de halogênio em compostos orgânicos usando o teste de chama com fio de cobre

Qualitative Analysis Beginner (Middle School) 25 min ~$5,00

Objetivo

Determinar se um composto orgânico contém átomos de halogênio (Cl, Br, I) usando o teste de Beilstein com fio de cobre.

Contexto

The Beilstein test is a simple qualitative test for halogens in organic compounds. A copper wire is heated in a flame to form copper(II) oxide, then dipped in the test substance and returned to the flame. If a halogen is present, volatile copper halide forms and imparts a green or blue-green color to the flame. The test is sensitive but not specific (it does not distinguish between Cl, Br, and I, and can give false positives with some nitrogen compounds).

Avisos de segurança

  • Chloroform is toxic — avoid inhalation and skin contact
  • Work in a fume hood when testing volatile organics
  • Hot copper wire can cause burns
  • Keep flammable solvents away from the flame

EPI necessário

goggles gloves lab_coat

Materiais

  • Copper wire (20 gauge) (15 cm)
    Make a small loop at one end
  • Chloroform (CHCl₃) (2 mL)
    Positive control
  • Ethanol (C₂H₅OH) (2 mL)
    Negative control
  • Unknown organic samples (2 mL each)
    3–4 samples
  • Cork or holder for copper wire (1)

Equipamentos

Bunsen burner Watch glasses (6) Forceps

Procedimento

1

Heat the copper wire loop in the oxidizing zone of the Bunsen burner until it glows red and no green color is visible (this burns off contaminants and forms CuO).

3 min Wire is extremely hot
2

Allow the wire to cool slightly, then dip it into the chloroform (positive control). Return the wire to the flame.

3 min Chloroform is volatile — use fume hood
3

Observe the bright green flame (positive result for halogen). Record the color and intensity.

2 min
4

Clean the wire by heating until green color disappears. Repeat the test with ethanol (negative control). No green color should appear.

3 min
5

Test each unknown sample using the same procedure. Record whether each gives a positive (green) or negative result.

10 min Clean wire between samples
6

Record all results and identify which unknowns likely contain halogen atoms.

4 min

Resultados esperados

Chloroform produces a vivid green flame (positive). Ethanol produces no green color (negative). Halogen-containing unknowns show green coloration of varying intensity.

Limpeza

Allow copper wire to cool. Store organic waste in halogenated or non-halogenated solvent waste containers as appropriate. Wipe down surfaces.

Detalhes

Categoria
Qualitative Analysis
Dificuldade
Beginner (Middle School)
Duração
25 min
Custo estimado
$5,00
Passos
6
Materiais
5

Mais experimentos

Arco-Íris de Indicadores de pH 45 min Cromatografia de Pigmentos Vegetais 60 min Desafio de Identificação de Substâncias Desconhecidas 75 min Espectroscopia de Emissão de Chama 60 min Identificação de Cátions por Precipitação 90 min Teste de Dureza da Água com Solução de Sabão 40 min Teste de Pérola de Bórax para Íons Metálicos 45 min Teste do Amido-Iodo para Carboidratos 30 min Testes de Identificação de Ânions 60 min

Frequently Asked Questions

What is the objective of Teste de Beilstein para Halogênios?
Determinar se um composto orgânico contém átomos de halogênio (Cl, Br, I) usando o teste de Beilstein com fio de cobre.
How difficult is Teste de Beilstein para Halogênios?
This experiment is rated as Beginner (Middle School). It takes approximately 25 minutes to complete.
What safety precautions are needed for Teste de Beilstein para Halogênios?
Key safety precautions include: Chloroform is toxic — avoid inhalation and skin contact; Work in a fume hood when testing volatile organics; Hot copper wire can cause burns.
What materials are needed for Teste de Beilstein para Halogênios?
The main materials required are: Copper wire (20 gauge), Chloroform (CHCl₃), Ethanol (C₂H₅OH), Unknown organic samples, Cork or holder for copper wire.
What results should I expect from Teste de Beilstein para Halogênios?
Chloroform produces a vivid green flame (positive). Ethanol produces no green color (negative). Halogen-containing unknowns show green coloration of varying intensity.