Supersaturação e Cristalização Instantânea

Desencadeamento da formação instantânea de cristais em acetato de sódio

Crystallization Intermediate (High School) 35 min ~$8,00

Objetivo

Preparar uma solução supersaturada de acetato de sódio e desencadear a cristalização instantânea, demonstrando a supersaturação metaestável e a cristalização exotérmica (gelo quente).

Contexto

Sodium acetate trihydrate can form extremely supersaturated solutions that remain liquid until disturbed. Adding a single seed crystal or scratching the container wall triggers rapid crystallization throughout the solution, releasing heat (exothermic). The resulting solid resembles ice but is warm to the touch.

Avisos de segurança

  • The solution gets hot when it crystallizes — handle with care
  • Sodium acetate is generally safe but avoid ingestion
  • Use heat-resistant gloves when handling hot solution

EPI necessário

goggles

Materiais

  • Sodium acetate trihydrate (100 g)
    Or make from vinegar + baking soda
  • Distilled water (10 mL)
    Minimal amount

Equipamentos

250 mL beaker or flask Hot plate Stirring rod Thermometer

Procedimento

1

Add 100 g sodium acetate trihydrate and 10 mL water to the beaker. Heat while stirring until all crystals dissolve (about 70°C).

8 min Handle hot solution carefully
2

Remove from heat and allow to cool to room temperature undisturbed. Do not shake or add anything.

15 min
3

Once cooled, the solution should remain liquid despite being supersaturated. Measure the temperature.

2 min
4

Drop a single small crystal of sodium acetate into the solution and observe the rapid crystallization wave.

2 min
5

Immediately measure the temperature of the newly formed crystals. Note the temperature increase (exothermic).

2 min Crystals will be warm
6

The process is reversible — reheat to dissolve and repeat.

5 min

Resultados esperados

When triggered, crystallization should sweep through the solution in seconds, forming a solid mass of warm crystals (hence "hot ice"). The temperature typically rises 10-20°C above room temperature. This is the principle behind reusable hand warmers.

Limpeza

Sodium acetate is reusable. Simply reheat to dissolve. Can be disposed down the drain. Rinse equipment.

Detalhes

Categoria
Crystallization
Dificuldade
Intermediate (High School)
Duração
35 min
Custo estimado
$8,00
Passos
6
Materiais
2

Mais experimentos

Bala de Açúcar Cristalizado 25 min Cristalização de Salol (Salicilato de Fenila) 30 min Cristalização Fracionada de Sal e Areia 35 min Cultivo de Cristais de Alúmen 30 min Cultivo de Cristais de Bismuto Arco-Íris 45 min Cultivo de Cristais de Sulfato de Cobre 30 min Recristalização do Ácido Benzoico 45 min

Frequently Asked Questions

What is the objective of Supersaturação e Cristalização Instantânea?
Preparar uma solução supersaturada de acetato de sódio e desencadear a cristalização instantânea, demonstrando a supersaturação metaestável e a cristalização exotérmica (gelo quente).
How difficult is Supersaturação e Cristalização Instantânea?
This experiment is rated as Intermediate (High School). It takes approximately 35 minutes to complete.
What safety precautions are needed for Supersaturação e Cristalização Instantânea?
Key safety precautions include: The solution gets hot when it crystallizes — handle with care; Sodium acetate is generally safe but avoid ingestion; Use heat-resistant gloves when handling hot solution.
What materials are needed for Supersaturação e Cristalização Instantânea?
The main materials required are: Sodium acetate trihydrate, Distilled water.
What results should I expect from Supersaturação e Cristalização Instantânea?
When triggered, crystallization should sweep through the solution in seconds, forming a solid mass of warm crystals (hence "hot ice"). The temperature typically rises 10-20°C above room temperature. This is the principle behind reusable hand warmers.