Spectroscopie d'Émission de Flamme

Identification quantitative des métaux par spectroscope et flamme

Qualitative Analysis Advanced (University) 60 min ~$15,00

Objectif

Utiliser un spectroscope pour observer et mesurer les longueurs d'onde des raies d'émission de différents ions métalliques dans une flamme.

Contexte

While simple flame tests show color, a spectroscope reveals the discrete emission lines responsible for those colors. Each element has a unique set of emission lines (an atomic fingerprint). This experiment bridges qualitative flame testing with the quantitative science of atomic emission spectroscopy, demonstrating Bohr's model of the atom and the origin of spectral lines.

Avertissements de sécurité

  • Methanol is highly flammable and toxic — handle with extreme care
  • Do not look directly at the flame without the spectroscope
  • Keep all flammable materials away from the burner
  • Ensure good ventilation

EPI requis

goggles gloves lab_coat

Matériaux

  • Metal salt solutions (0.5M) (5 mL each)
    Na, Li, K, Cu, Sr, Ca, Ba chlorides
  • Hydrochloric acid (1M) (20 mL)
    Wire cleaning
  • Methanol (50 mL)
    For solution flame method
  • Distilled water (50 mL)

Équipement

Handheld spectroscope or diffraction grating Bunsen burner Nichrome wire loops (7) Watch glasses (7) Spray bottle (for mist method)

Procédure

1

Set up the spectroscope by viewing a fluorescent light to calibrate and identify the mercury emission lines as reference.

5 min
2

Clean a nichrome wire with HCl. Dip in sodium chloride solution and hold in the flame. View through the spectroscope and record the bright yellow emission at 589 nm.

7 min
3

Repeat with lithium chloride. Record the bright red emission line near 671 nm.

7 min
4

Repeat with potassium chloride. View through cobalt glass to filter sodium contamination. Record the violet emission near 766 nm.

7 min
5

Test copper, strontium, calcium, and barium chlorides in sequence. For each, record all visible emission lines and their approximate wavelengths.

20 min Clean wire between samples
6

Compile an emission spectrum chart showing each element's characteristic lines. Compare with published spectral data.

14 min

Résultats attendus

Each metal shows distinct spectral lines: Na at 589 nm (yellow doublet), Li at 671 nm (red), K at 766 nm (violet, visible through cobalt glass), Cu at 510–515 nm (green) and 325 nm, Sr at 461 nm (blue) and 606 nm (orange-red).

Nettoyage

Clean all nichrome wires with HCl. Dispose of metal salt solutions in inorganic waste. Rinse watch glasses.

Détails

Catégorie
Qualitative Analysis
Difficulté
Advanced (University)
Durée
60 min
Coût estimé
$15,00
Étapes
6
Matériaux
4

Plus d'expériences

Arc-en-ciel d'Indicateurs de pH 45 min Chromatographie des Pigments Végétaux 60 min Défi d'Identification de Substances Inconnues 75 min Identification des Cations par Précipitation 90 min Test Amidon-Iode pour les Glucides 30 min Test de Beilstein pour les Halogènes 25 min Test de Dureté de l'Eau avec une Solution Savonneuse 40 min Test de Perle de Borax pour les Ions Métalliques 45 min Tests d'Identification des Anions 60 min

Frequently Asked Questions

What is the objective of Spectroscopie d'Émission de Flamme?
Utiliser un spectroscope pour observer et mesurer les longueurs d'onde des raies d'émission de différents ions métalliques dans une flamme.
How difficult is Spectroscopie d'Émission de Flamme?
This experiment is rated as Advanced (University). It takes approximately 60 minutes to complete.
What safety precautions are needed for Spectroscopie d'Émission de Flamme?
Key safety precautions include: Methanol is highly flammable and toxic — handle with extreme care; Do not look directly at the flame without the spectroscope; Keep all flammable materials away from the burner.
What materials are needed for Spectroscopie d'Émission de Flamme?
The main materials required are: Metal salt solutions (0.5M), Hydrochloric acid (1M), Methanol, Distilled water.
What results should I expect from Spectroscopie d'Émission de Flamme?
Each metal shows distinct spectral lines: Na at 589 nm (yellow doublet), Li at 671 nm (red), K at 766 nm (violet, visible through cobalt glass), Cu at 510–515 nm (green) and 325 nm, Sr at 461 nm (blue) and 606 nm (orange-red).