Reação Oscilante de Briggs-Rauscher

Um relógio químico que alterna entre incolor, âmbar e azul intenso

Classroom Demonstrations Advanced (University) 40 min ~$20,00

Objetivo

Observar uma reação química oscilante que cicla repetidamente entre três estados de cor distintos, demonstrando cinética química não linear.

Contexto

The Briggs-Rauscher reaction is one of the most visually stunning demonstrations of oscillating chemical kinetics. Three solutions are mixed, and the resulting solution spontaneously cycles between colorless, amber, and deep blue states for several minutes. The oscillations occur because two competing reaction pathways alternately dominate: a radical pathway (producing I₂, which reacts with starch to form the blue color) and a non-radical pathway (consuming I₂, clearing the blue).

Avisos de segurança

  • 30% H₂O₂ causes burns — handle with extreme care
  • H₂SO₄ is corrosive
  • KIO₃ is an oxidizer
  • Wear face shield during mixing step
  • Do not lean over the reaction vessel

EPI necessário

goggles gloves lab_coat

Materiais

  • Potassium iodate (KIO₃) (4.3 g)
    Solution A component
  • Malonic acid (CH₂(COOH)₂) (1.6 g)
    Solution B component
  • Manganese(II) sulfate (MnSO₄) (0.4 g)
    Solution B catalyst
  • Starch solution (1%) (5 mL)
    Solution B indicator
  • Hydrogen peroxide (30%) (50 mL)
    Solution C
  • Sulfuric acid (1M H₂SO₄) (20 mL)
    Solution A acidification
  • Distilled water (500 mL)

Equipamentos

Beakers (500 mL, 3 for solutions + 1 for mixing) Magnetic stirrer and stir bar Graduated cylinders White background paper

Procedimento

1

Prepare Solution A: Dissolve 4.3 g KIO₃ in 100 mL warm water. Add 20 mL of 1M H₂SO₄.

5 min Handle acid carefully
2

Prepare Solution B: Dissolve 1.6 g malonic acid and 0.4 g MnSO₄ in 100 mL water. Add 5 mL of 1% starch solution.

5 min
3

Prepare Solution C: Dilute 50 mL of 30% H₂O₂ to 100 mL with water.

3 min 30% H₂O₂ is corrosive
4

Set the magnetic stirrer to moderate speed. Pour all three solutions simultaneously into the large beaker on the stirrer.

2 min Step back after mixing
5

Observe: the solution cycles colorless → amber → deep blue → colorless, repeating for 5–15 minutes. Time the oscillation period.

15 min
6

Record the number of oscillations and the period of each cycle. Note how the period changes over time.

5 min
7

Discuss the mechanism: competing radical and non-radical pathways, the role of iodine and starch, and the concept of chemical oscillators.

5 min

Resultados esperados

The solution oscillates between colorless, amber, and deep blue 10–15 times before settling to a permanent dark blue. Each oscillation takes 10–30 seconds initially, with the period increasing as reactants are consumed.

Limpeza

The spent solution contains iodine and manganese. Collect in inorganic waste. Rinse all glassware. Clean the magnetic stir bar.

Detalhes

Categoria
Classroom Demonstrations
Dificuldade
Advanced (University)
Duração
40 min
Custo estimado
$20,00
Passos
7
Materiais
7

Mais experimentos

Béquer Desaparecendo (Correspondência de Índice de Refração) 15 min Coluna Arco-Íris de Densidades 30 min Congelamento Instantâneo: Água Super-resfriada 120 min Fluido Não Newtoniano: Oobleck 20 min Magnésio Ardendo em Gelo Seco 25 min Pasta de Dente de Elefante 20 min Quimioluminescência com Luminol 30 min Reação da Termite 30 min Reação do Relógio de Iodo 45 min Reação do Sódio com Água 25 min

Frequently Asked Questions

What is the objective of Reação Oscilante de Briggs-Rauscher?
Observar uma reação química oscilante que cicla repetidamente entre três estados de cor distintos, demonstrando cinética química não linear.
How difficult is Reação Oscilante de Briggs-Rauscher?
This experiment is rated as Advanced (University). It takes approximately 40 minutes to complete.
What safety precautions are needed for Reação Oscilante de Briggs-Rauscher?
Key safety precautions include: 30% H₂O₂ causes burns — handle with extreme care; H₂SO₄ is corrosive; KIO₃ is an oxidizer.
What materials are needed for Reação Oscilante de Briggs-Rauscher?
The main materials required are: Potassium iodate (KIO₃), Malonic acid (CH₂(COOH)₂), Manganese(II) sulfate (MnSO₄), Starch solution (1%), Hydrogen peroxide (30%).
What results should I expect from Reação Oscilante de Briggs-Rauscher?
The solution oscillates between colorless, amber, and deep blue 10–15 times before settling to a permanent dark blue. Each oscillation takes 10–30 seconds initially, with the period increasing as reactants are consumed.