Titulação Redox com Permanganato de Potássio

Determinação da concentração de ferro(II) usando KMnO₄

Titrations Advanced (University) 50 min ~$18,00

Objetivo

Determinar a concentração de uma solução de sulfato de ferro(II) titulando com permanganato de potássio padronizado, um reagente autoindicador.

Contexto

Potassium permanganate is a powerful oxidizing agent that reacts with Fe2+ in acidic solution. MnO4- (purple) is reduced to Mn2+ (nearly colorless), so permanganate acts as its own indicator. The endpoint occurs when a single drop of excess KMnO4 produces a permanent pink/purple color.

Avisos de segurança

  • KMnO₄ stains skin and clothing permanently
  • H₂SO₄ is corrosive
  • Wear safety goggles and gloves throughout
  • Wipe up KMnO₄ spills immediately

EPI necessário

goggles gloves lab_coat

Materiais

  • Iron(II) sulfate solution (100 mL)
    Unknown concentration
  • Potassium permanganate (KMnO₄) (100 mL)
    0.02M standardized
  • Sulfuric acid (H₂SO₄) (50 mL)
    1M
  • Distilled water (200 mL)

Equipamentos

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette Pipette filler White tile

Procedimento

1

Rinse the burette with KMnO₄ solution, then fill to the 0 mL mark. Record the meniscus reading (read from the top of the meniscus since KMnO₄ is opaque).

5 min KMnO₄ stains — handle carefully
2

Pipette exactly 25.0 mL of iron(II) sulfate solution into the Erlenmeyer flask.

3 min
3

Add 10 mL of 1M sulfuric acid to the flask to ensure acidic conditions.

2 min Handle acid carefully
4

Slowly add KMnO₄ from the burette while swirling. Each drop will decolorize as Fe2+ reduces MnO4-.

10 min
5

As the endpoint approaches, add drop by drop until a faint permanent pink/purple color persists for 30 seconds.

5 min
6

Record the final burette reading and calculate the volume used.

2 min
7

Repeat at least twice for concordant results.

15 min
8

Calculate the Fe2+ concentration using the balanced equation: MnO4- + 5Fe2+ + 8H+ → Mn2+ + 5Fe3+ + 4H2O.

5 min

Resultados esperados

The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.

Limpeza

Dilute waste solutions and dispose of KMnO₄ waste according to lab protocols. Rinse the burette thoroughly with water. Clean any stains with dilute acid or sodium sulfite.

Frequently Asked Questions

What is the objective of Titulação Redox com Permanganato de Potássio?
Determinar a concentração de uma solução de sulfato de ferro(II) titulando com permanganato de potássio padronizado, um reagente autoindicador.
How difficult is Titulação Redox com Permanganato de Potássio?
This experiment is rated as Advanced (University). It takes approximately 50 minutes to complete.
What safety precautions are needed for Titulação Redox com Permanganato de Potássio?
Key safety precautions include: KMnO₄ stains skin and clothing permanently; H₂SO₄ is corrosive; Wear safety goggles and gloves throughout.
What materials are needed for Titulação Redox com Permanganato de Potássio?
The main materials required are: Iron(II) sulfate solution, Potassium permanganate (KMnO₄), Sulfuric acid (H₂SO₄), Distilled water.
What results should I expect from Titulação Redox com Permanganato de Potássio?
The solution should transition from colorless to a persistent faint pink/purple at the endpoint. The 1:5 molar ratio of KMnO₄ to Fe2+ should yield an accurate concentration.