Fabricação de Nylon 6,10 (Truque da Corda de Nylon)

Puxando um fio contínuo de nylon de uma interface

Organic Synthesis Intermediate (High School) 30 min ~$18,00

Objetivo

Sintetizar nylon 6,10 na interface de duas soluções imiscíveis e puxar um fio contínuo do béquer.

Contexto

The nylon rope trick is a dramatic demonstration of interfacial polymerization. When a solution of hexamethylenediamine (aqueous) is layered with sebacoyl chloride (in hexane), nylon forms at the interface. The polymer film can be continuously pulled out as a thread or rope.

Avisos de segurança

  • Hexane is highly flammable — no open flames
  • Sebacoyl chloride is corrosive and moisture-sensitive
  • Hexamethylenediamine is an irritant
  • Work in a fume hood

EPI necessário

goggles gloves lab_coat

Materiais

  • Hexamethylenediamine (3 g)
    Dissolved in 50 mL water
  • Sebacoyl chloride (2 mL)
    In 50 mL hexane
  • Sodium hydroxide (NaOH) (1 g)
    Added to the aqueous layer
  • Hexane (50 mL)
    Solvent for acid chloride

Equipamentos

250 mL beaker Forceps or glass rod Paper towel

Procedimento

1

Prepare the aqueous solution: dissolve 3 g hexamethylenediamine and 1 g NaOH in 50 mL water in the beaker.

3 min Irritant — avoid contact
2

Carefully layer the sebacoyl chloride/hexane solution on top of the aqueous solution. Do not mix.

3 min Work in fume hood
3

Observe the nylon film forming at the interface between the two layers.

2 min
4

Using forceps, gently pull the nylon film from the center of the interface. A continuous strand should follow.

5 min
5

Wind the nylon strand around a glass rod, continuously pulling from the interface.

10 min
6

Rinse the collected nylon with water and blot dry. Examine the fiber properties.

5 min

Resultados esperados

A continuous strand of nylon can be pulled from the interface for several meters. The polymer is white, slightly elastic, and strong. The reaction continues as long as both reagents are present.

Limpeza

Allow remaining solution to react. Dispose of hexane waste in organic solvent waste. Neutralize the aqueous layer. Rinse all glassware.

Detalhes

Categoria
Organic Synthesis
Dificuldade
Intermediate (High School)
Duração
30 min
Custo estimado
$18,00
Passos
6
Materiais
4

Mais experimentos

Condensação Aldólica (Dibenzalacetona) 75 min Esterificação de Fischer do Acetato de Etila 90 min Extração de Cafeína do Chá 90 min Fabricação de Sabão por Saponificação 60 min Preparação de Acetaminofeno (Paracetamol) 80 min Produção de Biodiesel a partir de Óleo Vegetal 60 min Síntese de Aspirina (Ácido Acetilsalicílico) 90 min Síntese de Luminol 120 min Síntese de Óleo de Banana (Acetato de Isoamila) 90 min Síntese de Slime (PVA Reticulado) 20 min

Frequently Asked Questions

What is the objective of Fabricação de Nylon 6,10 (Truque da Corda de Nylon)?
Sintetizar nylon 6,10 na interface de duas soluções imiscíveis e puxar um fio contínuo do béquer.
How difficult is Fabricação de Nylon 6,10 (Truque da Corda de Nylon)?
This experiment is rated as Intermediate (High School). It takes approximately 30 minutes to complete.
What safety precautions are needed for Fabricação de Nylon 6,10 (Truque da Corda de Nylon)?
Key safety precautions include: Hexane is highly flammable — no open flames; Sebacoyl chloride is corrosive and moisture-sensitive; Hexamethylenediamine is an irritant.
What materials are needed for Fabricação de Nylon 6,10 (Truque da Corda de Nylon)?
The main materials required are: Hexamethylenediamine, Sebacoyl chloride, Sodium hydroxide (NaOH), Hexane.
What results should I expect from Fabricação de Nylon 6,10 (Truque da Corda de Nylon)?
A continuous strand of nylon can be pulled from the interface for several meters. The polymer is white, slightly elastic, and strong. The reaction continues as long as both reagents are present.