Горение магния в сухом льду

Магний продолжает гореть в твёрдом диоксиде углерода, восстанавливая CO₂ до углерода

Classroom Demonstrations Advanced (University) 25 мин ~$15,00

Цель

Показать, что магний способен восстанавливать CO₂, опровергая распространённое заблуждение, что CO₂ всегда тушит огонь.

Предпосылки

Magnesium burns so intensely (over 3000°C) that it can reduce carbon dioxide to elemental carbon. When a burning magnesium ribbon is placed in a cavity carved into dry ice (solid CO₂), it continues to burn brilliantly white, producing magnesium oxide (white powder) and elemental carbon (black specks). This reaction (2Mg + CO₂ → 2MgO + C) dramatically shows that CO₂ is not always an effective fire extinguisher and that thermodynamic favorability depends on the specific reactants involved.

Предупреждения по безопасности

  • Burning magnesium is extremely bright — never look directly at it without shade protection
  • Dry ice causes frostbite on contact — never handle with bare hands
  • Perform behind a safety shield
  • Keep a fire-resistant mat underneath
  • Do not attempt to extinguish burning Mg with water — explosion risk
  • Ensure ventilation — CO₂ accumulation in enclosed spaces is dangerous

Требуемые СИЗ

goggles gloves lab_coat face_shield

Материалы

  • Magnesium ribbon (30 cm)
    Clean, bright surface
  • Dry ice block (1 kg)
    Solid CO₂ (−78.5°C)
  • Tongs (long-handled) (1)
    For handling dry ice

Оборудование

Safety shield Fire-resistant mat Chisel or screwdriver (for carving cavity in dry ice) Lighter or matches Welding goggles or #14 shade glass

Процедура

1

Using tongs, carve a small cavity (about 3 cm deep) in the dry ice block. Place the dry ice on a fire-resistant mat.

3 мин Wear insulated gloves for dry ice
2

Set up the safety shield between the demonstration and the audience. Distribute welding goggles or instruct everyone to look away when ignited.

2 мин
3

Light one end of the magnesium ribbon. Once burning, quickly place it in the dry ice cavity using tongs.

2 мин Do not look directly at the flame
4

Place another piece of dry ice on top to create a CO₂ atmosphere around the burning magnesium.

2 мин
5

Observe: the magnesium continues to burn with an intense white flame inside the CO₂ environment. It does NOT go out.

3 мин Maintain safe distance
6

After the reaction, examine the residue: white MgO powder and black carbon specks. Discuss the reaction: 2Mg + CO₂ → 2MgO + C.

8 мин Wait for residue to cool completely
7

Discuss implications for fire safety: why Mg fires cannot be extinguished with CO₂, water, or standard fire extinguishers.

5 мин

Ожидаемые результаты

The magnesium continues to burn brilliantly inside the dry ice. After the reaction, white MgO and black carbon specks are visible in the dry ice cavity. This proves CO₂ has been reduced to elemental carbon.

Уборка

Allow all residues to cool and dry ice to sublimate. Sweep up MgO and carbon residue. No chemical waste disposal needed.

Детали

Категория
Classroom Demonstrations
Сложность
Advanced (University)
Продолжительность
25 мин
Прим. стоимость
$15,00
Шаги
7
Материалы
3

Ещё эксперименты

Исчезающий стакан (совмещение показателей преломления) 15 min Мгновенное замерзание: переохлаждённая вода 120 min Неньютоновская жидкость: оублек 20 min Осциллирующая реакция Бриггса–Раушера 40 min Радуга из столбиков жидкостей разной плотности 30 min Реакция иодных часов 45 min Реакция натрия с водой 25 min Слоновья зубная паста 20 min Термитная реакция 30 min Хемилюминесценция с люминолом 30 min

Frequently Asked Questions

What is the objective of Горение магния в сухом льду?
Показать, что магний способен восстанавливать CO₂, опровергая распространённое заблуждение, что CO₂ всегда тушит огонь.
How difficult is Горение магния в сухом льду?
This experiment is rated as Advanced (University). It takes approximately 25 minutes to complete.
What safety precautions are needed for Горение магния в сухом льду?
Key safety precautions include: Burning magnesium is extremely bright — never look directly at it without shade protection; Dry ice causes frostbite on contact — never handle with bare hands; Perform behind a safety shield.
What materials are needed for Горение магния в сухом льду?
The main materials required are: Magnesium ribbon, Dry ice block, Tongs (long-handled).
What results should I expect from Горение магния в сухом льду?
The magnesium continues to burn brilliantly inside the dry ice. After the reaction, white MgO and black carbon specks are visible in the dry ice cavity. This proves CO₂ has been reduced to elemental carbon.