Simulação de Calorimetria em Bomba

Medição do conteúdo energético de alimentos usando calorimetria

Thermochemistry Intermediate (High School) 45 min ~$10,00

Objetivo

Medir o conteúdo energético (calórico) de diferentes alimentos queimando-os e medindo o calor transferido para a água.

Contexto

A simple food calorimeter uses the heat from burning food to raise the temperature of water. By measuring the mass of food burned and the temperature rise of the water, the energy content can be calculated. This demonstrates why some foods have more calories than others.

Avisos de segurança

  • Open flame — keep flammables away
  • Burning food produces smoke — ventilate
  • The can will get hot — do not touch with bare hands

EPI necessário

goggles lab_coat

Materiais

  • Food samples (10 g each)
    Peanuts, cashews, marshmallows, chips
  • Distilled water (400 mL)
  • Aluminum foil (1 sheet)
    For makeshift shield

Equipamentos

Empty aluminum soda can Ring stand and ring Needle or pin (mounted) Lighter Thermometer Analytical balance (0.01 g)

Procedimento

1

Measure 100 mL of water and pour into the soda can. Record the initial temperature.

3 min
2

Set up the can on the ring stand. Position a mounted needle below the can to hold the food sample.

5 min
3

Weigh a food sample (e.g., one peanut) accurately. Impale it on the needle.

2 min
4

Light the food sample with the lighter. Position it under the can to heat the water.

5 min Open flame — be careful
5

When the food stops burning, immediately stir and record the maximum water temperature.

2 min Can is hot
6

Calculate energy: q = m(water) × c × ΔT. Convert to kJ/g or Cal/g.

5 min
7

Repeat for different food types. Compare measured values with nutritional labels.

15 min
8

Discuss why measured values are lower than label values (heat lost to surroundings).

5 min

Resultados esperados

Nuts (high fat) should give the highest energy per gram (~25 kJ/g measured vs ~25 kJ/g label). Marshmallows (sugar) ~15 kJ/g. Measured values will be 30-50% lower than label values due to heat losses.

Limpeza

Allow everything to cool. Dispose of food residue. Rinse the can and clean the work area.

Detalhes

Categoria
Thermochemistry
Dificuldade
Intermediate (High School)
Duração
45 min
Custo estimado
$10,00
Passos
8
Materiais
3

Mais experimentos

A Dissolução Nem Sempre É Exotérmica 25 min Calor de Combustão do Magnésio 50 min Calorimetria em Copo de Café 40 min Capacidade Calorífica Específica de Metais 40 min Cristalização Exotérmica de Acetato de Sódio 30 min Demonstração de Reação Endotérmica 20 min Entalpia de Fusão do Gelo 25 min Química das Bolsas de Frio 20 min Verificação da Lei de Hess 60 min

Frequently Asked Questions

What is the objective of Simulação de Calorimetria em Bomba?
Medir o conteúdo energético (calórico) de diferentes alimentos queimando-os e medindo o calor transferido para a água.
How difficult is Simulação de Calorimetria em Bomba?
This experiment is rated as Intermediate (High School). It takes approximately 45 minutes to complete.
What safety precautions are needed for Simulação de Calorimetria em Bomba?
Key safety precautions include: Open flame — keep flammables away; Burning food produces smoke — ventilate; The can will get hot — do not touch with bare hands.
What materials are needed for Simulação de Calorimetria em Bomba?
The main materials required are: Food samples, Distilled water, Aluminum foil.
What results should I expect from Simulação de Calorimetria em Bomba?
Nuts (high fat) should give the highest energy per gram (~25 kJ/g measured vs ~25 kJ/g label). Marshmallows (sugar) ~15 kJ/g. Measured values will be 30-50% lower than label values due to heat losses.