从卤水中提取锂用于电池生产

从盐湖和地热水中采集最轻的金属

Energy & Battery Technology Global Industrial Scale $25 billion

概述

Lithium is extracted from continental brines (salt flats in Chile, Argentina, Bolivia — the 'Lithium Triangle') by solar evaporation and chemical precipitation, or from hard-rock spodumene ore (Australia) by acid roasting. Lithium demand is surging due to lithium-ion batteries for EVs and energy storage. Brine extraction accounts for about 50% of global production and is lower cost, while spodumene processing is faster but more energy-intensive. Battery-grade lithium carbonate or lithium hydroxide requires >99.5% purity.

化学工艺

For brine: Lithium-bearing brine (200-2,000 ppm Li) is pumped to evaporation ponds where solar evaporation over 12-18 months concentrates lithium to 6,000+ ppm while NaCl and KCl crystallize out. Magnesium is removed by lime addition, and lithium carbonate is precipitated by adding soda ash (Na₂CO₃) at 90 degrees C. The precipitate is filtered, washed, and dried to battery-grade specification.

2LiCl(brine) + Na₂CO₃ →[90 degrees C] Li₂CO₃↓ + 2NaCl (lithium carbonate precipitation)
MgCl₂ + Ca(OH)₂ → Mg(OH)₂↓ + CaCl₂ (magnesium removal)
Li₂CO₃ + Ca(OH)₂ → 2LiOH + CaCO₃ (causticization to lithium hydroxide)

原材料

  • Lithium-bearing brine — Salt flats (Atacama, Hombre Muerto, Uyuni) (Lithium source (200-2,000 ppm Li))
  • Soda ash (Na₂CO₃) — Solvay process or trona mining (Lithium precipitation agent)
  • Calcium hydroxide (Ca(OH)₂) — Lime kiln (Magnesium removal agent)

最终产品

  • Battery-grade lithium carbonate (Li₂CO₃) — NMC and LFP cathode production (>99.5% purity, <10 ppm Na, <5 ppm Fe)
  • Battery-grade lithium hydroxide (LiOH·H₂O) — High-nickel NMC cathode production (>56.5% LiOH, required for NMC 811)
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Brine evaporation consumes vast amounts of water in the world's driest regions, creating tension with local communities and ecosystems. Evaporation ponds cover hundreds of hectares. Spodumene processing requires energy-intensive acid roasting at 250 degrees C. Direct lithium extraction (DLE) technologies promise 90% less water use and land footprint.

安全注意事项

最新创新

Direct lithium extraction (DLE) using ion-exchange, adsorption, or membrane technologies can extract lithium from dilute brines in hours instead of months, with much lower water consumption.
Lithium extraction from geothermal brines provides both clean energy and lithium.
Recycling of end-of-life EV batteries is expected to provide 10-20% of lithium supply by 2035.

生产规模

130000

吨/年

$25 billion

市场价值

更多 Energy & Battery Technology

PEM水电解制绿氢

Commercial Production

光伏硅太阳能电池制造

Global Industrial Scale

厌氧消化生产沼气

Global Industrial Scale

气体离心法铀燃料浓缩

Global Industrial Scale

氢燃料电池（PEMFC）电化学

Commercial Production

蒸汽甲烷重整制氢

Global Industrial Scale

酯交换法生产生物柴油

Global Industrial Scale

Frequently Asked Questions

What industry uses 从卤水中提取锂用于电池生产?
从卤水中提取锂用于电池生产 is used in the energy & battery technology sector at global industrial scale scale.
What process is involved in 从卤水中提取锂用于电池生产?
For brine: Lithium-bearing brine (200-2,000 ppm Li) is pumped to evaporation ponds where solar evaporation over 12-18 months concentrates lithium to 6,000+ ppm while NaCl and KCl crystallize out. Magnesium is removed by lime addition, and lithium carbonate is precipitated by adding soda ash (Na₂CO₃)
What is the economic significance of 从卤水中提取锂用于电池生产?
从卤水中提取锂用于电池生产 has a market value of $25 billion and annual production of 130,000 tons.
What is the environmental impact of 从卤水中提取锂用于电池生产?
Brine evaporation consumes vast amounts of water in the world's driest regions, creating tension with local communities and ecosystems. Evaporation ponds cover hundreds of hectares. Spodumene processing requires energy-intensive acid roasting at 250 degrees C. Direct lithium extraction (DLE) technol
What raw materials are used in 从卤水中提取锂用于电池生产?
The main raw materials include: Lithium-bearing brine, Soda ash (Na₂CO₃), Calcium hydroxide (Ca(OH)₂).