Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ

Sợi tổng hợp thành công thương mại đầu tiên

Materials Science & Polymers Global Industrial Scale $26 billion

Tổng quan

Nylon 6,6 is produced by the polycondensation of hexamethylenediamine and adipic acid, forming one of the most important engineering thermoplastics and synthetic fibers. Invented by Wallace Carothers at DuPont in 1935, nylon was the first fully synthetic fiber and revolutionized the textile industry. Beyond fibers, nylon 6,6 is used for automotive parts, electrical connectors, cable ties, and industrial components due to its excellent mechanical properties and chemical resistance.

Quy trình hóa học

Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extruded, quenched, and cut into chips or directly spun into fiber.

nH2N(CH2)6NH2 + nHOOC(CH2)4COOH -> -[NH(CH2)6NH-CO(CH2)4CO]n- + (2n-1)H2O (step-growth polycondensation)

Nguyên liệu thô

  • Hexamethylenediamine (H2N(CH2)6NH2) — Hydrogenation of adiponitrile (Diamine monomer)
  • Adipic acid (HOOC(CH2)4COOH) — Oxidation of cyclohexane with nitric acid (Diacid monomer)

Sản phẩm cuối

  • Nylon 6,6 resin/fiber — Textiles, carpets, automotive parts, electrical connectors (Tm = 265 degrees C, excellent abrasion resistance)
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced.

Lưu ý an toàn

Đổi mới gần đây

Bio-based adipic acid from renewable feedstocks (muconic acid route from glucose) is in commercial development.
Chemical recycling of nylon 6,6 back to monomers by depolymerization enables closed-loop production.

Quy mô sản xuất

4000000

tấn/năm

$26 billion

giá trị thị trường

Xem thêm Materials Science & Polymers

Lưu Hóa Cao Su bằng Khâu Mạch Lưu Huỳnh

Global Industrial Scale

Sản Xuất Composite Sợi Thủy Tinh

Global Industrial Scale

Sản Xuất Nhựa Epoxy từ Bisphenol A

Global Industrial Scale

Sản Xuất Silicone (PDMS) qua Quy Trình Trực Tiếp

Global Industrial Scale

Sản Xuất Sợi Carbon từ Polyacrylonitrile

Commercial Production

Sản Xuất Sợi Kevlar (Poly-p-phenylene Terephthalamide)

Commercial Production

Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta

Global Industrial Scale

Frequently Asked Questions

What industry uses Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ?
Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ is used in the materials science & polymers sector at global industrial scale scale.
What process is involved in Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ?
Hexamethylenediamine and adipic acid are combined in equimolar ratio to form nylon salt (AH salt), which is dissolved in water. The solution is heated under pressure (18 bar) to 220 degrees C, then pressure is released to drive off steam while temperature is raised to 280 degrees C. The melt is extr
What is the economic significance of Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ?
Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ has a market value of $26 billion and annual production of 4,000,000 tons.
What is the environmental impact of Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ?
Adipic acid production is a significant source of N2O, a greenhouse gas 298 times more potent than CO2. Catalytic N2O abatement is now standard at adipic acid plants, reducing emissions by over 90%. Nylon 6,6 is recyclable by depolymerization back to monomers, though this is not yet widely practiced
What raw materials are used in Sản Xuất Nylon 6,6 qua Đa Ngưng Tụ?
The main raw materials include: Hexamethylenediamine (H2N(CH2)6NH2), Adipic acid (HOOC(CH2)4COOH).