Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta

Vật liệu nhựa được sản xuất nhiều nhất thế giới

Materials Science & Polymers Global Industrial Scale $140 billion

Tổng quan

Polyethylene (PE) is the most produced plastic globally, manufactured through catalytic polymerization of ethylene. Three major grades exist: HDPE (high density, linear chains via Ziegler-Natta or chromium catalysts), LDPE (low density, branched chains via free-radical high-pressure process), and LLDPE (linear low density, gas-phase with metallocene catalysts). The development of Ziegler-Natta catalysts earned Karl Ziegler and Giulio Natta the 1963 Nobel Prize in Chemistry.

Quy trình hóa học

For HDPE: ethylene is polymerized at 80-150 degrees C and 10-80 bar using Ziegler-Natta (TiCl4/MgCl2 + AlEt3) or Phillips (CrO3/SiO2) catalysts in gas-phase fluidized bed or slurry reactors. For LDPE: ethylene is polymerized at 150-300 degrees C and 1000-3000 bar using peroxide initiators in tubular or autoclave reactors.

nCH2=CH2 ->[catalyst] -(CH2-CH2)n- (addition polymerization, DeltaH = -93.6 kJ/mol)

Nguyên liệu thô

  • Ethylene (C2H4) — Steam cracking of hydrocarbons (Monomer)
  • 1-Hexene or 1-butene — Oligomerization of ethylene (Comonomer (for LLDPE))
  • Ziegler-Natta catalyst (TiCl4/MgCl2) — Chemical synthesis (Polymerization catalyst)

Sản phẩm cuối

  • Polyethylene resin pellets — Films, bottles, pipes, containers, toys (HDPE (0.941-0.965 g/cm3), LDPE (0.910-0.940 g/cm3))
<path stroke-linecap="round" stroke-linejoin="round" d="M12 9v3.75m-9.303 3.376c-.866 1.5.217 3.374 1.948 3.374h14.71c1.73 0 2.813-1.874 1.948-3.374L13.949 3.378c-.866-1.5-3.032-1.5-3.898 0L2.697 16.126zM12 15.75h.007v.008H12v-.008z" />

Environmental Impact

Polyethylene is a major contributor to plastic pollution in oceans and landfills. Only about 30% is recycled globally. Microplastic formation from PE degradation is an emerging concern. Production from fossil ethylene contributes to CO2 emissions, though bio-based PE from sugarcane ethanol is now commercially available.

Lưu ý an toàn

Đổi mới gần đây

Chemical recycling via pyrolysis converts PE waste back to monomers.
Bio-based polyethylene from sugarcane ethanol (Braskem I'm green PE) provides a renewable alternative.
Single-site metallocene catalysts enable precise control of molecular architecture.

Quy mô sản xuất

110000000

tấn/năm

$140 billion

giá trị thị trường

Xem thêm Materials Science & Polymers

Frequently Asked Questions

What industry uses Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta?
Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta is used in the materials science & polymers sector at global industrial scale scale.
What process is involved in Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta?
For HDPE: ethylene is polymerized at 80-150 degrees C and 10-80 bar using Ziegler-Natta (TiCl4/MgCl2 + AlEt3) or Phillips (CrO3/SiO2) catalysts in gas-phase fluidized bed or slurry reactors. For LDPE: ethylene is polymerized at 150-300 degrees C and 1000-3000 bar using peroxide initiators in tubular
What is the economic significance of Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta?
Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta has a market value of $140 billion and annual production of 110,000,000 tons.
What is the environmental impact of Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta?
Polyethylene is a major contributor to plastic pollution in oceans and landfills. Only about 30% is recycled globally. Microplastic formation from PE degradation is an emerging concern. Production from fossil ethylene contributes to CO2 emissions, though bio-based PE from sugarcane ethanol is now co
What raw materials are used in Tổng Hợp Polyetylen qua Xúc Tác Ziegler-Natta?
The main raw materials include: Ethylene (C2H4), 1-Hexene or 1-butene, Ziegler-Natta catalyst (TiCl4/MgCl2).