Xác Định Sắt Trong Nước

Đo nồng độ sắt hòa tan bằng phép đo màu thioxianat

Colorimetry Intermediate (High School) 75 phút ~$10,00

Mục tiêu

Xác định nồng độ sắt(III) trong mẫu nước bằng phương pháp đo màu thioxianat.

Bối cảnh

Iron(III) ions react with thiocyanate ions (SCN⁻) to form the intensely red-colored complex [Fe(SCN)]²⁺. The intensity of the red color is proportional to the Fe³⁺ concentration, following the Beer-Lambert law. This method is widely used in water quality testing and environmental monitoring. Students learn both the analytical technique and the chemistry of complex ion formation.

Cảnh báo an toàn

  • FeCl₃ solution stains skin and clothing
  • KSCN is harmful if swallowed
  • HNO₃ is corrosive — handle with care
  • Dispose of thiocyanate waste in designated containers

PPE cần thiết

goggles gloves lab_coat

Vật liệu

  • Iron(III) chloride (FeCl₃) standard (100 mL)
    0.01 M stock solution
  • Potassium thiocyanate (KSCN) (100 mL)
    0.1 M solution
  • Dilute HNO₃ (0.1 M) (50 mL)
    To maintain acidity
  • Water sample (50 mL)
    Unknown iron content
  • Distilled water (500 mL)
    For dilutions

Thiết bị

Colorimeter or spectrophotometer Cuvettes (matched pair) Volumetric flasks (50 mL, 7 total) Pipettes (1 mL, 5 mL, 10 mL) Pipette filler

Quy trình

1

Prepare a series of standard Fe³⁺ solutions (0, 1, 2, 4, 6, 8, 10 ppm) by diluting the stock FeCl₃ solution in 50 mL volumetric flasks.

15 phút
2

Add 5 mL of 0.1 M KSCN and 2 mL of dilute HNO₃ to each standard flask and the water sample. Make up to volume with distilled water.

10 phút
3

Allow 5 minutes for full color development. The solutions should range from pale to deep red.

5 phút
4

Set the colorimeter to 480 nm. Zero with the blank solution (0 ppm Fe³⁺ + KSCN).

5 phút
5

Measure the absorbance of each standard solution and the water sample.

15 phút
6

Plot the calibration curve (absorbance vs. concentration). Use it to determine the iron concentration in the water sample.

15 phút
7

Calculate the iron concentration and evaluate whether the water meets drinking water standards (<0.3 ppm).

10 phút

Kết quả dự kiến

The calibration curve should be linear from 0 to 10 ppm. The deep red color of [Fe(SCN)]²⁺ intensifies with increasing Fe³⁺ concentration. The water sample's iron content is determined from the calibration curve.

Dọn dẹp

Collect all thiocyanate-containing solutions in labeled waste. Rinse all glassware thoroughly. Wipe down the colorimeter.

Chi tiết

Danh mục
Colorimetry
Độ khó
Intermediate (High School)
Thời gian
75 phút
Chi phí ước tính
$10,00
Số bước
7
Vật liệu
5

Thí nghiệm khác

Phân Tích Phẩm Màu Thực Phẩm Bằng Quang Phổ 60 min Phân Tích Protein Bằng Phép Đo Màu (Phương Pháp Bradford) 60 min Phân Tích Quang Phổ Hỗn Hợp 75 min Xác Định Aspirin Bằng Quang Phổ 75 min Xác Định Glucose Bằng Phép Đo Màu 60 min Xác Định Photphat Bằng Phép Đo Màu 90 min Xác Minh Định Luật Beer-Lambert 60 min

Frequently Asked Questions

What is the objective of Xác Định Sắt Trong Nước?
Xác định nồng độ sắt(III) trong mẫu nước bằng phương pháp đo màu thioxianat.
How difficult is Xác Định Sắt Trong Nước?
This experiment is rated as Intermediate (High School). It takes approximately 75 minutes to complete.
What safety precautions are needed for Xác Định Sắt Trong Nước?
Key safety precautions include: FeCl₃ solution stains skin and clothing; KSCN is harmful if swallowed; HNO₃ is corrosive — handle with care.
What materials are needed for Xác Định Sắt Trong Nước?
The main materials required are: Iron(III) chloride (FeCl₃) standard, Potassium thiocyanate (KSCN), Dilute HNO₃ (0.1 M), Water sample, Distilled water.
What results should I expect from Xác Định Sắt Trong Nước?
The calibration curve should be linear from 0 to 10 ppm. The deep red color of [Fe(SCN)]²⁺ intensifies with increasing Fe³⁺ concentration. The water sample's iron content is determined from the calibration curve.