Phản Ứng Thermit

Phản ứng oxi hóa-khử cực kỳ tỏa nhiệt tạo ra sắt nóng chảy từ gỉ và nhôm

Classroom Demonstrations Advanced (University) 30 phút ~$15,00

Mục tiêu

Minh họa phản ứng oxi hóa-khử tỏa nhiệt cực độ trong đó nhôm khử oxit sắt thành sắt nóng chảy.

Bối cảnh

The thermite reaction (2Al + Fe₂O₃ → Al₂O₃ + 2Fe) is one of the most exothermic chemical reactions known. Aluminum reduces iron(III) oxide to produce molten iron and aluminum oxide, reaching temperatures above 2500°C. The reaction is driven by the much greater affinity of aluminum for oxygen compared to iron (the activity series in dramatic action). Thermite is used industrially for welding railroad tracks and cutting through steel.

Cảnh báo an toàn

  • EXTREME CAUTION: Reaction produces temperatures above 2500°C
  • Perform OUTDOORS ONLY with at least 10 m clearance
  • Molten iron droplets are ejected — no one within 5 meters
  • Heavy-duty safety shield is mandatory
  • Have a Class D fire extinguisher on hand (not water or CO₂)
  • Aluminum powder is an explosion hazard — keep away from flame until ready
  • Never attempt to move or disturb the reaction once ignited
  • Wait at least 30 minutes for products to cool before approaching

PPE cần thiết

goggles gloves lab_coat face_shield

Vật liệu

  • Iron(III) oxide (Fe₂O₃) powder (50 g)
    Fine rust powder
  • Aluminum powder (15 g)
    Fine mesh (200+)
  • Magnesium ribbon (20 cm)
    Ignition fuse
  • Sand (5 kg)
    Insulation bed

Thiết bị

Clay flower pot (with drainage hole plugged) Ring stand with iron ring Metal bucket filled with dry sand Safety shield (heavy duty) Fire extinguisher (Class D) Long-handled lighter or match holder

Quy trình

1

OUTDOORS ONLY: Set up the ring stand over the sand-filled bucket. Place the clay pot (with drainage hole plugged with a small wad of paper) on the iron ring.

5 phút 10 m minimum clearance from buildings
2

Mix 50 g Fe₂O₃ with 15 g Al powder thoroughly (by weight, approximately 3:1 ratio) in the clay pot.

3 phút No open flames near Al powder
3

Insert the magnesium ribbon into the top of the mixture as a fuse. Ensure the shield is positioned correctly.

2 phút
4

Ensure all observers are at least 5 meters away and behind cover. Light the magnesium ribbon with a long lighter and retreat immediately.

2 phút RETREAT IMMEDIATELY after igniting
5

Observe from safe distance: the reaction produces an intensely bright white-orange glow and sparks. Molten iron drips through the pot into the sand below.

3 phút Do not look directly at the reaction without eye protection
6

Wait at least 30 minutes for everything to cool. Dig through the sand to find the solidified iron button.

10 phút Products may still be very hot
7

Examine the iron button and white Al₂O₃ slag. Discuss: activity series, enthalpy of formation, why Al is used in thermite (high affinity for O₂), and industrial applications.

5 phút

Kết quả dự kiến

An intensely bright, self-sustaining reaction lasting 10–20 seconds. Molten iron collects at the bottom (a solid metal button when cooled). White Al₂O₃ slag forms on top. The reaction demonstrates the extreme energy difference between Al-O and Fe-O bonds.

Dọn dẹp

Once fully cooled, collect the iron button and slag. Sand can be reused. Do not pour water on hot products. Dispose of residue in general waste.

Chi tiết

Danh mục
Classroom Demonstrations
Độ khó
Advanced (University)
Thời gian
30 phút
Chi phí ước tính
$15,00
Số bước
7
Vật liệu
4

Thí nghiệm khác

Chất Lỏng Phi Newton: Oobleck 20 min Cốc Thủy Tinh Biến Mất (Khớp Chiết Suất) 15 min Cột Cầu Vồng Mật Độ 30 min Đóng Băng Tức Thì: Nước Siêu Lạnh 120 min Kem Đánh Răng Voi 20 min Magie Cháy Trong Băng Khô 25 min Phản Ứng Dao Động Briggs-Rauscher 40 min Phản Ứng Đồng Hồ Iot 45 min Phản Ứng Natri với Nước 25 min Phát Quang Hóa Học với Luminol 30 min

Frequently Asked Questions

What is the objective of Phản Ứng Thermit?
Minh họa phản ứng oxi hóa-khử tỏa nhiệt cực độ trong đó nhôm khử oxit sắt thành sắt nóng chảy.
How difficult is Phản Ứng Thermit?
This experiment is rated as Advanced (University). It takes approximately 30 minutes to complete.
What safety precautions are needed for Phản Ứng Thermit?
Key safety precautions include: EXTREME CAUTION: Reaction produces temperatures above 2500°C; Perform OUTDOORS ONLY with at least 10 m clearance; Molten iron droplets are ejected — no one within 5 meters.
What materials are needed for Phản Ứng Thermit?
The main materials required are: Iron(III) oxide (Fe₂O₃) powder, Aluminum powder, Magnesium ribbon, Sand.
What results should I expect from Phản Ứng Thermit?
An intensely bright, self-sustaining reaction lasting 10–20 seconds. Molten iron collects at the bottom (a solid metal button when cooled). White Al₂O₃ slag forms on top. The reaction demonstrates the extreme energy difference between Al-O and Fe-O bonds.