인산염의 비색 정량

몰리브덴 블루법으로 물 속 인산염 농도 측정하기

Colorimetry Advanced (University) 90 분 ~$15.00

목표

몰리브덴산암모늄 비색법으로 물 시료의 인산염 농도를 결정한다.

배경

The molybdenum blue method is the standard technique for phosphate determination in environmental water analysis. Phosphate ions react with ammonium molybdate in acidic solution to form a phosphomolybdate complex, which is then reduced by ascorbic acid to form an intensely blue colored complex (molybdenum blue). The intensity of the blue color is proportional to phosphate concentration. This method can detect phosphate at concentrations as low as 0.01 mg/L.

안전 경고

  • Ammonium molybdate solution contains sulfuric acid — corrosive
  • Antimony compounds are toxic
  • Use pipette fillers — never mouth-pipette
  • Dispose of molybdate waste in heavy metal waste container

필수 개인 보호 장비

goggles gloves lab_coat

재료

  • Potassium dihydrogen phosphate (KH₂PO₄) (1 g)
    For stock standard
  • Ammonium molybdate solution (100 mL)
    2.5% in 5M H₂SO₄
  • Ascorbic acid solution (50 mL)
    1% freshly prepared
  • Antimony potassium tartrate (10 mL)
    Catalyst solution
  • Environmental water sample (100 mL)
    Pond, river, or tap water
  • Distilled water (500 mL)

장비

Spectrophotometer Cuvettes (1 cm path length) Volumetric flasks (50 mL, 8 total) Pipettes (1 mL, 5 mL, 10 mL) Water bath (37°C)

실험 절차

1

Prepare a 100 ppm phosphate stock solution by dissolving 0.1433 g KH₂PO₄ in distilled water and making up to 1 L. Then prepare working standards: 0, 0.1, 0.2, 0.5, 1.0, 2.0 ppm.

15 분
2

Prepare the combined reagent: mix 50 mL ammonium molybdate solution, 5 mL antimony potassium tartrate solution, and 30 mL ascorbic acid solution. Use within 4 hours.

10 분 Handle acid carefully
3

To each 50 mL standard flask and the water sample, add 8 mL of combined reagent. Mix well.

10 분
4

Allow color development for 10 minutes at room temperature (or 5 minutes in 37°C water bath).

10 분
5

Measure absorbance at 880 nm (or 710 nm if 880 nm is not available). Zero with the blank.

15 분
6

Plot the calibration curve. Determine the phosphate concentration of the water sample.

15 분
7

Evaluate the result against environmental standards. Phosphate above 0.02 mg/L may indicate eutrophication risk.

15 분

예상 결과

The calibration curve should be linear in the 0–2 ppm range. The blue color deepens with increasing phosphate. Environmental samples typically show 0.01–0.5 ppm in clean water, higher in agricultural runoff areas.

정리

Collect all molybdate-containing solutions in labeled waste. Rinse all volumetric glassware. Clean cuvettes immediately.

세부 정보

카테고리
Colorimetry
난이도
Advanced (University)
소요 시간
90 분
예상 비용
$15.00
단계
7
재료
6

더 많은 실험

분광광도법으로 아스피린 정량 75 min 분광광도법으로 식품 색소 분석 60 min 혼합물의 분광광도법 분석 75 min 포도당의 비색 정량 60 min 람베르트-베어 법칙 검증 60 min 비색 단백질 정량(브래드퍼드법) 60 min 물 속 철 함량 결정 75 min

Frequently Asked Questions

What is the objective of 인산염의 비색 정량?
몰리브덴산암모늄 비색법으로 물 시료의 인산염 농도를 결정한다.
How difficult is 인산염의 비색 정량?
This experiment is rated as Advanced (University). It takes approximately 90 minutes to complete.
What safety precautions are needed for 인산염의 비색 정량?
Key safety precautions include: Ammonium molybdate solution contains sulfuric acid — corrosive; Antimony compounds are toxic; Use pipette fillers — never mouth-pipette.
What materials are needed for 인산염의 비색 정량?
The main materials required are: Potassium dihydrogen phosphate (KH₂PO₄), Ammonium molybdate solution, Ascorbic acid solution, Antimony potassium tartrate, Environmental water sample.
What results should I expect from 인산염의 비색 정량?
The calibration curve should be linear in the 0–2 ppm range. The blue color deepens with increasing phosphate. Environmental samples typically show 0.01–0.5 ppm in clean water, higher in agricultural runoff areas.