표백제의 아이오딘 적정

가정용 표백제의 차아염소산나트륨 농도 결정하기

Titrations Advanced (University) 50 분 ~$15.00

목표

티오황산나트륨을 이용한 아이오딘 적정법으로 시판 표백제의 차아염소산나트륨(NaOCl) 농도를 결정한다.

배경

In iodometric titrations, the analyte (hypochlorite) oxidizes iodide ions to iodine, which is then titrated with sodium thiosulfate. The endpoint is detected using starch indicator. This indirect method is widely used for determining the concentration of oxidizing agents.

안전 경고

  • Bleach is an irritant and oxidizer
  • Do not mix bleach with acid in large quantities — produces chlorine gas
  • Work in a well-ventilated area or fume hood
  • Wear safety goggles and gloves

필수 개인 보호 장비

goggles gloves lab_coat

재료

  • Household bleach (50 mL)
    Dilute 1:10 before use
  • Potassium iodide (KI) (5 g)
    Excess
  • Sodium thiosulfate (Na₂S₂O₃) (100 mL)
    0.1M standardized
  • Starch indicator (10 mL)
    1% solution
  • Acetic acid (CH₃COOH) (20 mL)
    2M
  • Distilled water (300 mL)

장비

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette 25 mL volumetric flask

실험 절차

1

Prepare a 1:10 dilution of the bleach with distilled water in the volumetric flask.

3 분 Bleach is irritating
2

Pipette 25.0 mL of the diluted bleach into the Erlenmeyer flask.

2 분
3

Add approximately 2 g of potassium iodide. The solution will turn brown/yellow as iodine is liberated.

2 분
4

Add 10 mL of 2M acetic acid to acidify the solution.

1 분 Work in ventilated area
5

Fill the burette with 0.1M sodium thiosulfate. Begin titrating the brown iodine solution.

5 분
6

When the solution becomes pale yellow, add 1 mL of starch indicator. The solution turns dark blue.

2 분
7

Continue titrating drop by drop until the blue color disappears and the solution becomes colorless.

5 분
8

Record the volume. Repeat for concordant results. Calculate the NaOCl concentration accounting for the dilution.

15 분

예상 결과

Household bleach typically contains 3-8% NaOCl. The endpoint should show a sharp transition from blue to colorless. Multiple concordant results should agree within 0.10 mL.

정리

Neutralize iodine waste with sodium thiosulfate before disposal. Rinse all glassware. Ensure proper ventilation during cleanup.

세부 정보

카테고리
Titrations
난이도
Advanced (University)
소요 시간
50 분
예상 비용
$15.00
단계
8
재료
6

더 많은 실험

페놀프탈레인을 이용한 산염기 적정 45 min 과망간산칼륨 산화환원 적정 50 min 전도도 적정 50 min 제산제 정제의 역적정 60 min 메틸 오렌지를 이용한 산염기 적정 40 min 이중 지시약을 이용한 탄산염-중탄산염 혼합물 적정 55 min 침전 적정(모어법) 45 min 아이오딘을 이용한 비타민 C 적정 40 min EDTA 착화 적정을 이용한 물 경도 측정 45 min pH 적정 곡선 50 min

Frequently Asked Questions

What is the objective of 표백제의 아이오딘 적정?
티오황산나트륨을 이용한 아이오딘 적정법으로 시판 표백제의 차아염소산나트륨(NaOCl) 농도를 결정한다.
How difficult is 표백제의 아이오딘 적정?
This experiment is rated as Advanced (University). It takes approximately 50 minutes to complete.
What safety precautions are needed for 표백제의 아이오딘 적정?
Key safety precautions include: Bleach is an irritant and oxidizer; Do not mix bleach with acid in large quantities — produces chlorine gas; Work in a well-ventilated area or fume hood.
What materials are needed for 표백제의 아이오딘 적정?
The main materials required are: Household bleach, Potassium iodide (KI), Sodium thiosulfate (Na₂S₂O₃), Starch indicator, Acetic acid (CH₃COOH).
What results should I expect from 표백제의 아이오딘 적정?
Household bleach typically contains 3-8% NaOCl. The endpoint should show a sharp transition from blue to colorless. Multiple concordant results should agree within 0.10 mL.