Titulación Complejométrica con EDTA para Dureza del Agua

Medición del contenido de calcio y magnesio en el agua

Titrations Advanced (University) 45 min ~$15,00

Objetivo

Determinar la dureza total de una muestra de agua titulando los iones Ca²⁺ y Mg²⁺ disueltos con EDTA usando Negro de Eriocromo T como indicador.

Antecedentes

EDTA (ethylenediaminetetraacetic acid) forms stable 1:1 complexes with metal ions. In the presence of Eriochrome Black T indicator at pH 10, the solution is wine-red when metal ions are present and turns blue when all metal ions are complexed by EDTA, marking the endpoint.

Advertencias de seguridad

  • Ammonia buffer has a strong odor — use in a ventilated area
  • Wear safety goggles
  • EDTA is generally safe but avoid ingestion

EPP requerido

goggles lab_coat

Materiales

  • Water sample (250 mL)
    Tap water or well water
  • EDTA solution (100 mL)
    0.01M, disodium salt
  • Eriochrome Black T indicator (5 mL)
    Solid or solution
  • Ammonia buffer (pH 10) (20 mL)
    NH₃/NH₄Cl buffer
  • Distilled water (200 mL)

Equipamiento

50 mL burette Burette stand and clamp 250 mL Erlenmeyer flask 25 mL pipette White tile

Procedimiento

1

Pipette exactly 25.0 mL of the water sample into the Erlenmeyer flask.

2 min
2

Add 2 mL of ammonia buffer (pH 10) to the flask.

1 min Ammonia odor — work in ventilated area
3

Add a small amount of Eriochrome Black T indicator. The solution should turn wine-red.

1 min
4

Fill the burette with 0.01M EDTA solution. Record the initial volume.

3 min
5

Titrate by adding EDTA slowly while swirling. The wine-red color will gradually shift.

10 min
6

Near the endpoint, add EDTA drop by drop until the color changes sharply from wine-red to blue.

5 min
7

Record the final volume. Repeat for concordant results.

12 min
8

Calculate total hardness in mg/L CaCO₃ equivalent using the formula: Hardness = (V(EDTA) x C(EDTA) x 100.09 x 1000) / V(sample).

5 min

Resultados esperados

Typical tap water has 100-250 mg/L total hardness (CaCO₃ equivalent). The color change should be a clear transition from wine-red to blue. Soft water requires less EDTA; hard water requires more.

Limpieza

Dispose of EDTA solutions down the drain (biodegradable at these concentrations). Rinse all glassware.

Detalles

Categoría
Titrations
Dificultad
Advanced (University)
Duración
45 min
Costo estimado
$15,00
Pasos
8
Materiales
5

Más experimentos

Curva de Titulación de pH 50 min Retrotitulación de Tabletas Antiácidas 60 min Titulación Ácido-Base con Fenolftaleína 45 min Titulación Ácido-Base con Naranja de Metilo 40 min Titulación con Doble Indicador de Mezcla Carbonato-Bicarbonato 55 min Titulación Conductométrica 50 min Titulación de Vitamina C con Yodo 40 min Titulación por Precipitación (Método de Mohr) 45 min Titulación Redox con Permanganato de Potasio 50 min Titulación Yodométrica de Lejía 50 min

Frequently Asked Questions

What is the objective of Titulación Complejométrica con EDTA para Dureza del Agua?
Determinar la dureza total de una muestra de agua titulando los iones Ca²⁺ y Mg²⁺ disueltos con EDTA usando Negro de Eriocromo T como indicador.
How difficult is Titulación Complejométrica con EDTA para Dureza del Agua?
This experiment is rated as Advanced (University). It takes approximately 45 minutes to complete.
What safety precautions are needed for Titulación Complejométrica con EDTA para Dureza del Agua?
Key safety precautions include: Ammonia buffer has a strong odor — use in a ventilated area; Wear safety goggles; EDTA is generally safe but avoid ingestion.
What materials are needed for Titulación Complejométrica con EDTA para Dureza del Agua?
The main materials required are: Water sample, EDTA solution, Eriochrome Black T indicator, Ammonia buffer (pH 10), Distilled water.
What results should I expect from Titulación Complejométrica con EDTA para Dureza del Agua?
Typical tap water has 100-250 mg/L total hardness (CaCO₃ equivalent). The color change should be a clear transition from wine-red to blue. Soft water requires less EDTA; hard water requires more.